Swimming Pool Calculator litres

Swimming Pool Volume Calculator

Swimming Pool Volume Calculator

Pool Dimensions (in feet)Pool Volume (litres)
10x20x4Formula Result
12x24x5Formula Result
15x30x6Formula Result
18x36x7Formula Result
20x40x8Formula Result

Please note that the “Pool Volume (litres)” column will display the calculated volume for each row based on the given pool dimensions. To use the table, insert your pool dimensions (length, width, and depth) in feet into the formula:

Pool Volume (litres) = Length (ft) x Width (ft) x Depth (ft) x 28.3168

Then, replace “Formula Result” in the table with the calculated value for each row. This will give you an estimate of the volume of your pool in litres based on its dimensions.

Remember that this is a basic estimation, and actual pool volumes may vary due to irregular shapes, sloping bottoms, or other factors. Always measure your pool accurately for more precise results.

FAQs


How do I calculate litres in my pool?

To calculate the volume of water in your pool in litres, you need to measure the dimensions of your pool (length, width, and depth) in meters and use the formula:

Pool Volume (litres) = Length (m) x Width (m) x Depth (m) x 1000

How many litres is a 16×32 inground pool?

To find the volume of a 16×32 inground pool in litres, you need to know the depth of the pool in meters. Use the formula mentioned earlier to calculate the volume.

How many litres is a full-size pool?

The term “full-size pool” is not specific enough to provide an accurate answer. Pool sizes can vary widely, from small residential pools to large commercial pools, and the volume will depend on the pool’s specific dimensions and depth.

How many litres of water are in a 10 pool?

To determine the volume of water in a “10 pool,” you need the pool’s dimensions (length, width, and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How do I calculate litres?

To calculate the volume of a rectangular or square pool in litres, use the formula:

Pool Volume (litres) = Length (m) x Width (m) x Depth (m) x 1000

For irregularly shaped pools, use the average depth.

How many litres of water does an 8ft pool hold?

To find the volume of water an 8ft pool holds, you need the pool’s dimensions (length, width, and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How many gallons is a 15×30 inground pool?

To convert the volume of a 15×30 inground pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How big is a pool that holds 30,000 gallons?

The size of a pool that holds 30,000 gallons depends on its shape and depth. Pool sizes can vary, but common examples might be around 16×32 feet with an average depth of 4-6 feet.

How many gallons is a 15×30 pool?

To convert the volume of a 15×30 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many litres does a 12-foot pool hold?

To find the volume of water a 12-foot pool holds, you need the pool’s dimensions (length, width, and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

What is the liter to gallon ratio?

1 liter is approximately equal to 0.264 gallons.

What is the average capacity of a pool?

The average capacity of a pool can vary widely depending on its size and type. Residential pools typically range from 10,000 to 30,000 gallons, while commercial pools can be much larger.

How many litres is a 10-foot Intex pool?

To find the volume of water a 10-foot Intex pool holds, you need the pool’s dimensions (length, width, and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How many gallons is an 18×48 pool?

To convert the volume of an 18×48 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is a 10 by 16 pool?

To convert the volume of a 10 by 16 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

See also  Adding Sugar to Wine Must Calculator

How much water is a liter?

1 liter is equal to 1,000 milliliters or approximately 0.26 gallons.

What size is a liter?

A liter is a metric unit of volume equal to 1,000 milliliters or about 33.8 fluid ounces.

What is the formula volume to litres?

The formula to convert volume to litres is:

Volume in litres = Volume in cubic meters x 1000

How many litres is a 10-foot round pool?

To find the volume of water a 10-foot round pool holds, you need the pool’s dimensions (diameter and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How much water does a 20-foot by 52-inch pool hold?

To find the volume of water a 20-foot by 52-inch pool holds, you need the pool’s dimensions (length, width, and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How many gallons is a 27-foot round 54-inch deep pool?

To convert the volume of a 27-foot round 54-inch deep pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is an 8-foot by 30-inch pool?

To convert the volume of an 8-foot by 30-inch pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons does it take to fill a 16×32 pool?

The number of gallons required to fill a 16×32 pool depends on the pool’s depth. To calculate the volume in gallons, you need the pool’s dimensions (length, width, and depth) in feet and then multiply by 7.48 (1 cubic foot = 7.48 gallons).

How many hours does it take to fill a 15,000-gallon pool?

The time it takes to fill a 15,000-gallon pool depends on the water flow rate and the capacity of the hose or filling system used. It’s best to measure the flow rate and calculate the time based on that.

How big is a 500,000-gallon pool?

The size of a 500,000-gallon pool can vary depending on its shape and depth. It might be a large commercial pool with dimensions around 82×164 feet and an average depth of 10 feet.

What size pool holds 18,000 gallons?

The size of a pool that holds 18,000 gallons can vary depending on its shape and depth. It might be around 12×24 feet with an average depth of 5.5 to 6 feet.

How big is a million-gallon pool?

A million-gallon pool is quite large and is typically found in water parks or large commercial settings. It might have dimensions of 200×400 feet with an average depth of 10 feet.

How many gallons is a 15x30x52 pool?

To convert the volume of a 15x30x52 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How do I calculate gallons in my inground pool?

To calculate the volume of an inground pool in gallons, you need the pool’s dimensions (length, width, and depth) in feet. Use the formula:

Pool Volume (gallons) = Length (ft) x Width (ft) x Depth (ft) x 7.48

How do I calculate gallons in my pool?

To calculate the volume of a pool in gallons, you need the pool’s dimensions (length, width, and depth) in feet. Use the formula:

Pool Volume (gallons) = Length (ft) x Width (ft) x Depth (ft) x 7.48

How big is a 35,000-litre pool?

To find the dimensions of a 35,000-litre pool, you need to know its shape and depth. Use the formula mentioned earlier and solve for the dimensions in meters.

How many gallons does a 12-foot by 30-inch pool hold?

To convert the volume of a 12-foot by 30-inch pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons of water does a 12x24x52 pool hold?

To convert the volume of a 12x24x52 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

Is 1 gallon the same as 4 liters?

No, 1 gallon is approximately equal to 3.7854 liters.

Does 2 liters equal 1 gallon?

No, 2 liters is less than 1 gallon. 1 gallon is approximately equal to 3.7854 liters.

Does 4 liters equal 1 gallon of water?

No, 4 liters is less than 1 gallon. 1 gallon is approximately equal to 3.7854 liters.

What is the most popular pool size?

See also  Furnace BTU Calculator

The most popular pool size for residential pools is often around 16×32 feet with an average depth of 5-6 feet.

How much does a 12×24 pool hold?

To find the volume of a 12×24 pool, you need to know the pool’s depth in feet. Use the formula mentioned earlier to calculate the volume in gallons.

How many litres is a 21-foot round pool?

To find the volume of water a 21-foot round pool holds, you need the pool’s depth in meters. Use the formula mentioned earlier to calculate the volume in litres.

How many gallons does a 10ft by 30-inch pool hold?

To convert the volume of a 10ft by 30-inch pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons of water in a 10ft round 30-inch deep pool?

To convert the volume of a 10ft round 30-inch deep pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons of water does a 32x16x52 pool hold?

To convert the volume of a 32x16x52 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

Does baking soda raise pH in a pool?

Yes, baking soda can raise the pH level of pool water.

How many gallons is 18ft by 52in pool?

To convert the volume of an 18ft by 52in pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons of water does a 16×48 pool hold?

To convert the volume of a 16×48 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is a 20×10 pool?

To convert the volume of a 20×10 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is a 16x10x42 Bestway pool?

To convert the volume of a 16x10x42 Bestway pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is a 14×42 pool?

To convert the volume of a 14×42 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

Is a liter of water more than a gallon?

No, a liter of water is less than a gallon. 1 gallon is approximately equal to 3.7854 liters.

How much water is 2 liters?

2 liters of water is approximately equal to 0.528 gallons.

How much water is 4 liters?

4 liters of water is approximately equal to 1.057 gallons.

How do I measure 1 litre of water?

To measure 1 litre of water, use a container that is marked in liters or use a measuring cup with liter markings.

What is an example of a litre?

An example of a liter is a standard water bottle, which is often 1 liter in capacity.

What is 1 liter equivalent to?

1 liter is equivalent to 1,000 milliliters or approximately 0.26 gallons.

Does volume mean litres?

Volume is a measurement of space and can be expressed in different units, including liters. Litres are a unit of volume used in the metric system.

How many liters of water are in a square foot?

The measurement of square feet is a two-dimensional area, not a volume, so it cannot be directly converted to liters.

How do you calculate the volume of water?

To calculate the volume of water, measure the dimensions of the container (length, width, and depth) in the same unit (e.g., meters or feet) and use the formula:

Volume = Length x Width x Depth

How many litres does a 12-foot pool hold?

To find the volume of water a 12-foot pool holds, you need the pool’s dimensions (diameter and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How many litres of water does an 8ft pool hold?

To find the volume of water an 8ft pool holds, you need the pool’s dimensions (diameter and depth) in meters. Use the formula mentioned earlier to calculate the volume in litres.

How big is a 10,000-gallon pool?

The size of a 10,000-gallon pool can vary depending on its shape and depth. It might be around 12×24 feet with an average depth of 5-6 feet.

How many gallons of water for a 48-inch by 20ft pool?

See also  Pallets per Truck Calculator

To convert the volume of a 48-inch by 20ft pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is a 22×52 pool?

To convert the volume of a 22×52 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons does a 52-inch by 24ft pool hold?

To convert the volume of a 52-inch by 24ft pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many litres is a 27-foot round pool?

To find the volume of water a 27-foot round pool holds, you need the pool’s depth in meters. Use the formula mentioned earlier to calculate the volume in litres.

How deep is the water in a 52-inch pool?

A 52-inch pool has a depth of 52 inches or approximately 4.33 feet.

How high do you fill a 52-inch pool?

For a 52-inch pool, you typically fill it with water up to the top, which is the maximum water level.

How many gallons are in an 18×48 pool?

To convert the volume of an 18×48 pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How many gallons is a 30-foot round above ground pool?

To convert the volume of a 30-foot round above-ground pool from litres to gallons, divide the volume in litres by 3.7854 (1 gallon = 3.7854 litres).

How deep is the water in a 42-inch pool?

A 42-inch pool has a depth of 42 inches or approximately 3.5 feet.

How big of a pool holds 20,000 gallons of water?

The size of a pool that holds 20,000 gallons can vary depending on its shape and depth. It might be around 16×32 feet with an average depth of 6 feet.

Is a 30,000-gallon pool large?

Yes, a 30,000-gallon pool is considered large and is typically found in larger residential properties, hotels, or public swimming facilities.

How many gallons of water does it take to fill a 12×24 pool?

The number of gallons required to fill a 12×24 pool depends on the pool’s depth. To calculate the volume in gallons, you need the pool’s dimensions (length, width, and depth) in feet and then multiply by 7.48 (1 cubic foot = 7.48 gallons).

How long to fill a 30,000-gallon pool with a hose?

The time it takes to fill a 30,000-gallon pool with a hose depends on the water flow rate and the capacity of the hose or filling system used. It’s best to measure the flow rate and calculate the time based on that.

How many hours a day should a 10,000-gallon pool run?

The recommended runtime for a pool pump for a 10,000-gallon pool is around 8 to 12 hours per day. However, factors like climate, bather load, and pool equipment efficiency can affect the ideal runtime.

How big is a 6,000-gallon pool?

The size of a 6,000-gallon pool can vary depending on its shape and depth. It might be around 10×20 feet with an average depth of 3 feet.

How big is a million-gallon pool?

A million-gallon pool is enormous and is typically found in large water parks, commercial facilities, or reservoirs.

Leave a Comment