Tarp Size Calculator

Tarpaulin Size Table

Here’s a table with some common tarpaulin sizes in both feet and meters:

Size (feet)	Size (meters)
4×6	1.2×1.8
4×8	1.2×2.4
4×12	1.2×3.6
6×8	1.8×2.4
8×10	2.4×3.0
10×12	3.0×3.6
12×16	3.6×4.8
16×20	4.8×6.0
20×30	6.0×9.1

Please note that these are just a few examples, and tarpaulins are available in various other sizes as well.

How do you calculate tarp size?

To calculate the tarp size, multiply the length and width of the area you want to cover for square or rectangular tarps. For triangular tarps, multiply the base length by the height and divide the result by 2. Ensure consistent units of measurement, and consider adding extra measurements for overhang and tying points.

To calculate the tarp size, you can follow these steps:

1. For a square or rectangular tarp:
   • Measure the length (L) and width (W) of the area you want to cover.
   • Multiply the length and width together: Tarp Size = L x W
2. For a triangular tarp:
   • Measure the base length (B) and height (H) of the triangle.
   • Multiply the base length by the height and divide the result by 2: Tarp Size = (B x H) / 2

Make sure to use consistent units of measurement, such as feet or meters, for all the dimensions. Adding a few extra feet or meters to the measurements can provide adequate coverage and account for any necessary overhang or tying points.

What is the most useful tarp size?

The most useful tarp size can vary depending on your specific needs and the intended use of the tarp. However, a versatile and commonly used tarp size is around 10 feet by 12 feet (3 meters by 3.7 meters). This size provides a good balance between coverage area and maneuverability, making it suitable for various applications such as camping, covering equipment, protecting outdoor furniture, or creating temporary shelters. Ultimately, the most useful tarp size will depend on the specific purpose and dimensions of the area you wish to cover.

How big is 3×4 tarpaulin?

A 3×4 tarpaulin refers to a tarpaulin (tarp) with dimensions of 3 feet by 4 feet. This means the tarp is 3 feet wide and 4 feet long, resulting in a total coverage area of 12 square feet. Keep in mind that tarp sizes are typically given in feet, but they can also be measured in meters or other units of length depending on the region and preference.

How big is a 5X7 tarp?

A 5×7 tarp refers to a tarpaulin (tarp) with dimensions of 5 feet by 7 feet. This means the tarp is 5 feet wide and 7 feet long, resulting in a total coverage area of 35 square feet.

Are tarps the actual size?

Tarps are typically advertised and sold based on their nominal or “cut size,” which refers to the size before any seams or hems are added. However, the actual size of a tarp may be slightly smaller due to these added features during the manufacturing process.

Manufacturers often include a disclaimer stating that the tarp size may vary slightly. For example, a tarp advertised as 10×12 feet may actually measure slightly smaller, such as 9 feet 6 inches by 11 feet 6 inches, due to the seam allowances and hems.

It’s important to review the product specifications or consult with the manufacturer to understand the exact dimensions and any potential variations for the specific tarp you are considering.

What size tarp is best for 2 people?

The best size of a tarp for 2 people can vary depending on the specific use and desired coverage. However, a commonly recommended size for camping or backpacking purposes is around 8 feet by 10 feet (2.4 meters by 3 meters). This size provides enough space to create a shelter or cover for two people, offering protection from rain or sun.

Keep in mind that the ideal tarp size can also depend on factors such as the desired amount of space, the number of gear items you want to keep under the tarp, and the specific camping or outdoor activities you plan to engage in. It’s always a good idea to consider your personal preferences and intended use to determine the best size of tarp for your needs.

How thick should a tarp be for waterproof?

The thickness of a tarp alone is not the sole determining factor for its waterproof properties. While thicker tarps may offer some advantages in terms of durability and resistance to tearing, the key factor for waterproofness is the material and the coating used.

In general, for a tarp to be effectively waterproof, it should be made from a material that is specifically designed to be waterproof or have a waterproof coating applied to it. Common materials used for waterproof tarps include polyethylene (PE), polyvinyl chloride (PVC), or canvas with a waterproof treatment.

When selecting a tarp, look for those labeled as “waterproof” or “water-resistant” and pay attention to the specific materials and coatings used. Additionally, consider factors such as seam sealing, reinforced corners, and grommets, as these can contribute to the overall waterproofness and durability of the tarp.

It’s worth noting that even with a waterproof tarp, proper setup, tensioning, and angle of installation can also affect its ability to shed water effectively.

What is a good thickness for outdoor tarp?

When considering the thickness of an outdoor tarp, it’s essential to balance durability and weight. A good thickness for an outdoor tarp is typically between 8 to 12 mil (0.2 to 0.3 mm). This thickness range provides a good balance between strength, flexibility, and weight.

Thicker tarps, such as those in the 12 to 14 mil range, offer increased durability and resistance to tearing. However, they can be heavier and less flexible, which may affect their ease of use and portability.

On the other hand, thinner tarps below 8 mil may be lighter and more flexible, but they may not be as durable and resistant to punctures or tears.

Ultimately, the best thickness for an outdoor tarp depends on the specific application, desired durability, and the environmental conditions it will be exposed to. It’s important to consider the specific needs and requirements of your outdoor activities before selecting the appropriate thickness for your tarp.

What is the resolution for tarpaulin 3×5?

The resolution of a tarpaulin is not determined by its size, such as 3×5. The resolution is related to digital images or designs that are printed on the tarpaulin.

Resolution is typically measured in dots per inch (DPI) or pixels per inch (PPI) and represents the level of detail and clarity in the printed image. The optimal resolution for a tarpaulin will depend on the viewing distance and the desired quality.

For large format printing like a tarpaulin, a commonly recommended resolution is around 100 DPI to 150 DPI. This resolution ensures that the image or design appears sharp and clear when viewed from a typical viewing distance.

It’s important to note that the resolution of a tarpaulin is a separate consideration from its physical size, such as 3×5 feet. The resolution relates to the quality of the printed content on the tarpaulin rather than the dimensions of the tarpaulin itself.

How many inches is 2×3 feet tarpaulin?

A 2×3 feet tarpaulin refers to a tarpaulin with dimensions of 2 feet by 3 feet. To convert the dimensions to inches, you simply multiply each dimension by 12 (since there are 12 inches in a foot).

2 feet * 12 inches/foot = 24 inches 3 feet * 12 inches/foot = 36 inches

Therefore, a 2×3 feet tarpaulin is equivalent to 24 inches by 36 inches in size.

Are tarps length by width?

Yes, tarps are typically described or specified in terms of their length by width. The length refers to the longer dimension of the tarp, while the width refers to the shorter dimension. For example, a tarp described as 10×12 feet means it has a length of 10 feet and a width of 12 feet. This convention allows for a consistent and standardized way of referencing the size and dimensions of tarps.

What is the best type of tarpaulin?

The best type of tarpaulin depends on your specific needs and the intended use. Different types of tarpaulins offer varying features and benefits. Here are a few common types of tarps:

1. Polyethylene (PE) Tarpaulins: PE tarps are lightweight, affordable, and waterproof. They are commonly used for general-purpose applications like covering equipment, protecting outdoor furniture, or as temporary shelters.
2. Polyvinyl Chloride (PVC) Tarpaulins: PVC tarps are known for their durability, UV resistance, and excellent waterproof properties. They are often used for heavy-duty applications such as construction, industrial covers, or long-term outdoor protection.
3. Canvas Tarpaulins: Canvas tarps are made from natural or synthetic fibers and are known for their strength, breathability, and resistance to mold and mildew. They are commonly used for outdoor storage covers, camping, or as drop cloths.
4. Mesh Tarps: Mesh tarps are constructed with woven mesh material, allowing air and light to pass through while providing some level of shade and protection. They are often used for fencing, privacy screens, or as windbreaks.

The best type of tarpaulin for you depends on factors such as the specific application, desired durability, waterproofness, UV resistance, and budget. It’s important to consider your specific needs and requirements before selecting the most suitable type of tarpaulin.

How many inches is a 3x4ft tarpaulin?

To convert the dimensions of a 3x4ft tarpaulin to inches, you simply multiply each dimension by 12 (since there are 12 inches in a foot).

3 feet * 12 inches/foot = 36 inches 4 feet * 12 inches/foot = 48 inches

Therefore, a 3x4ft tarpaulin is equivalent to 36 inches by 48 inches in size.

Can you cut tarpaulin to size?

Yes, tarpaulins can be cut to a desired size. Tarpaulins are often sold in standard sizes, but they can be easily trimmed or cut to fit specific needs or dimensions. Many tarps are made from materials that can be cut with scissors, utility knives, or other cutting tools.

When cutting a tarpaulin, it’s important to follow some guidelines:

1. Measure and mark: Use a measuring tape or ruler to determine the desired dimensions and mark the tarpaulin accordingly. Double-check your measurements before cutting.
2. Use proper tools: Choose appropriate cutting tools such as sharp scissors or a utility knife with a fresh blade. Ensure the tools are suitable for cutting through the tarpaulin material.
3. Cut carefully: Make slow, deliberate cuts along the marked lines, applying steady and even pressure. Take care to avoid accidentally cutting yourself or damaging nearby surfaces.
4. Prevent fraying: To minimize fraying along the cut edges, you can use a heat source like a lighter or a heat gun to gently melt and seal the edges. Be cautious when using heat and keep a safe distance to avoid burning or melting the tarpaulin excessively.

By cutting a tarpaulin to size, you can customize it for your specific needs and achieve a better fit or coverage for your intended use.