Sealcoating Cost Calculator

Sealcoating costs can vary depending on factors like the type of driveway and your location. On average, sealcoating an asphalt driveway may cost around $0.15 to $0.25 per square foot. For a 1,000 square foot driveway, this can amount to roughly $150 to $250. Keep in mind that prices can differ based on local market conditions and the condition of your driveway.

Driveway Type	Estimated Cost per Square Foot	Estimated Total Cost (for 1,000 sq. ft. driveway)
Asphalt Driveway	$0.15 – $0.25	$150 – $250
Concrete Driveway	$0.20 – $0.30	$200 – $300
Gravel Driveway	$0.05 – $0.15	$50 – $150
Paver Stone Driveway	$0.25 – $0.40	$250 – $400

FAQs

• How much does 5 gallons of Sealcoating cover?
  • Approximately 250 to 350 square feet, depending on the thickness of the application.
• How much does 1 gallon of asphalt sealer cover?
  • Roughly 50 to 70 square feet, also depending on the thickness of the application.
• How far does a 5-gallon bucket of driveway sealer go?
  • It can typically cover around 1,250 to 1,750 square feet, considering a standard application.
• Is Sealcoating worth the money?
  • Sealcoating can be worth the money as it helps protect and extend the life of your asphalt driveway, potentially saving you from costly repairs in the long run.
• How many square feet does a 5-gallon bucket of seal coat cover?
  • Approximately 1,250 to 1,750 square feet.
• How many gallons of sealcoat do I need for a driveway?
  • To estimate, measure the square footage of your driveway and divide it by 50 to 70 (the square footage a gallon covers). This will give you an estimate of how many gallons you need.
• Do you need 2 coats of asphalt sealer?
  • Two coats are often recommended for better coverage and protection, with the second coat applied perpendicular to the first.
• Can you put too much sealer on an asphalt driveway?
  • Yes, applying too much sealer can lead to a thick, uneven surface that may not dry properly and could crack or peel.
• How many square feet does a 55-gallon drum of asphalt sealer cover?
  • Around 2,750 to 3,850 square feet, assuming a standard application.
• What is the longest-lasting driveway sealer?
  • Coal tar-based sealers tend to be more durable and longer-lasting compared to asphalt-based ones.
• How many days does it take for driveway sealer to dry?
  • It typically takes 24 to 48 hours for driveway sealer to dry, but this can vary depending on temperature and humidity.
• How often should you seal your driveway?
  • On average, every 2 to 4 years, but it depends on the climate and wear and tear.
• What time of year is best for sealcoating?
  • Late spring to early fall, when temperatures are consistently above 50°F (10°C) and rain is not expected for a few days.
• Does sealcoating fill cracks?
  • Sealcoating can help fill small cracks, but it’s not a substitute for proper crack repair.
• What are the cons of sealcoating?
  • Cons can include the cost of application, the need for periodic resealing, and the potential for a slippery surface when wet.
• What is the best driveway sealer?
  • There are various options, but the best one depends on your specific needs and preferences. Consult with professionals or research products for your region.
• How many square feet is a 2-car driveway?
  • A standard 2-car driveway is typically around 400 to 600 square feet.
• How do you calculate driveway sealer?
  • Measure the square footage of your driveway and divide it by the coverage rate of the sealer you plan to use.
• What is the best temperature to sealcoat a driveway?
  • Ideally, the temperature should be between 50°F to 85°F (10°C to 30°C) for proper drying and curing.
• How do you seal cracks in a driveway?
  • Clean the cracks, fill them with crack filler or patching material, and then seal over them.
• How do you calculate blacktop?
  • Blacktop, or asphalt, is typically calculated by measuring the square footage of the area to be paved and estimating the thickness of the asphalt layer needed.
• Should you wet the driveway before sealing?
  • It’s not necessary to wet the driveway before sealing, but it should be clean and dry.
• Is it better to brush or squeegee driveway sealer?
  • Both brushing and squeegeeing can work well; it’s a matter of personal preference and experience.
• Can you put driveway sealer on too thick?
  • Yes, applying sealer too thickly can lead to problems like cracking and peeling.
• Why is my asphalt driveway slippery after sealing?
  • Excess sealer or improper application can make the surface slippery when wet.
• How long should I stay off asphalt after applying sealer?
  • Typically, it’s best to stay off the sealed surface for 24 to 48 hours to allow it to fully cure.
• How much does 300 gallons of asphalt sealer weigh?
  • Approximately 2,400 to 3,000 pounds (1,090 to 1,360 kilograms).
• How much sand do I add to asphalt sealer?
  • The amount of sand added to asphalt sealer can vary, but a common ratio is 2 to 4 pounds of sand per gallon of sealer.
• How many gallons of sealer do I need?
  • See earlier answer about calculating sealer amount based on your driveway’s square footage.
• Which is better: oil or water-based driveway sealer?
  • Both have their advantages, but water-based sealers are more environmentally friendly, while oil-based sealers may provide longer-lasting protection.
• Are there different grades of driveway sealer?
  • Yes, there are various grades and types of driveway sealers designed for different purposes and climates.
• Is it too late to seal my driveway?
  • It’s never too late to seal your driveway, but the condition of the asphalt may affect the results.
• Does rain affect sealcoating?
  • Rain shortly after sealcoating can negatively impact the drying and curing process, so it’s best to avoid rain for 24 to 48 hours.
• How long should it not rain after sealing a driveway?
  • Ideally, it should not rain for at least 24 to 48 hours after sealing.
• What are the pros and cons of sealing an asphalt driveway?
  • Pros include protection against UV rays and water damage, improved appearance, and potentially extended lifespan. Cons can include cost and periodic resealing.
• How do I know when my driveway needs to be sealed?
  • When the surface starts to show signs of wear, fading, or small cracks, it’s a good time to consider sealing.
• What is the best weather to seal asphalt driveways?
  • Mild, dry weather with temperatures between 50°F to 85°F (10°C to 30°C) is ideal.
• How long after sealcoating can it rain?
  • Ideally, you should wait at least 24 to 48 hours after sealcoating before allowing rain to fall on the surface.
• Does Sealcoating extend the life of asphalt?
  • Yes, sealcoating can help extend the life of asphalt by protecting it from the elements and preventing deterioration.
• Can driveway sealing be done in winter?
  • It’s not recommended to seal a driveway in winter, as the cold temperatures can affect the curing process.
• Should you sealcoat before or after winter?
  • Sealcoating is typically done in the warmer months before winter to protect the driveway from harsh winter conditions.
• What is the difference between crack sealing and seal coating?
  • Crack sealing involves filling and sealing cracks in the asphalt, while seal coating is the application of a protective layer over the entire surface.
• Can you use Flex Seal on driveway cracks?
  • Flex Seal is not typically recommended for use on asphalt driveway cracks. Specialized crack fillers are more suitable.
• Should I fill asphalt cracks before sealing?
  • Yes, it’s generally a good practice to fill cracks before applying a sealcoat for better results.
• Is Sealcoating worth the money?
  • Sealcoating can be worth the money as it helps protect and extend the life of your asphalt driveway, potentially saving you from costly repairs in the long run.
• What is the best material for Sealcoating a driveway?
  • The best material for sealcoating a driveway depends on factors like climate and personal preference, with options including coal tar-based and asphalt-based sealers.
• What is the difference between asphalt and sealing?
  • Asphalt is the material used for paving driveways, while sealing involves applying a protective coating over the asphalt to extend its lifespan.
• What is the longest-lasting driveway sealer?
  • Coal tar-based sealers tend to be more durable and longer-lasting compared to asphalt-based ones.
• What is the most expensive driveway sealer?
  • High-quality, specialized sealers with advanced features can be more expensive, but the exact price can vary by brand and location.
• Why not to seal asphalt?
  • While sealing asphalt can provide benefits, some reasons not to seal include cost, improper application, and the need for periodic resealing.
• What is the cheapest driveway to install?
  • Gravel driveways are often the cheapest to install compared to asphalt or concrete.
• What is a good size driveway?
  • A good size for a driveway depends on your needs, but a two-car driveway is common, measuring around 400 to 600 square feet.
• How many feet is a typical driveway?
  • A typical driveway can vary in length, but it often ranges from 20 to 40 feet for a single-car driveway and 40 to 60 feet for a two-car driveway.
• How much will 5 gallons of driveway sealer cover?
  • Approximately 250 to 350 square feet.
• How much area will a 5-gallon bucket of driveway sealer cover?
  • It can typically cover around 1,250 to 1,750 square feet, considering a standard application.
• How much area does 5 gallons of driveway sealer cover?
  • Approximately 1,250 to 1,750 square feet.