Pole Barn Lighting Calculator

Pole Barn Lighting Calculator

Barn Width (feet): Barn Length (feet): Barn Height (feet): Desired Illuminance Level (lux): Calculate

Aspect	Details
Lighting Type	LED lights are commonly used for pole barn lighting due to their energy efficiency, long lifespan, and bright illumination.
Illuminance Level	The recommended illuminance level for a pole barn depends on its purpose. For general storage, 20-50 foot-candles may be sufficient, while work areas may require 50-100 foot-candles or more.
Lumens per Square Foot	For general lighting, a range of 20-50 lumens per square foot is common for pole barns.
Number of Lights Needed	To calculate the number of lights needed, divide the total lumens required for the barn by the lumens output of the LED fixtures you plan to use.
Light Spacing	The spacing between lights depends on the type of LED fixtures and their beam angle. For even lighting, spacing them at intervals equal to the mounting height is a common practice.
Mounting Height	Mounting height for pole barn lights typically ranges from 10 to 20 feet.
Wattage per Fixture	LED fixtures for pole barns usually range from 20W to 150W or more, depending on the required brightness and size of the barn.
Light Distribution	Consider using LED fixtures with wide beam angles to ensure uniform lighting distribution throughout the barn.
Motion Sensors	Incorporating motion sensors can help save energy by automatically turning off lights when no activity is detected.
Light Color Temperature	For pole barns, a color temperature of around 4000K to 5000K (cool white) is often preferred, as it provides bright, crisp illumination.
Energy Efficiency	LED lights are highly energy-efficient, consuming much less power compared to traditional lighting options.
Lighting Controls	Implementing lighting controls, such as dimmers or smart lighting systems, allows for adjusting light levels based on specific needs, saving energy and extending the lifespan of the fixtures.
Weather Resistance	Ensure the selected LED fixtures are rated for outdoor use and are weather-resistant to withstand harsh environmental conditions.
Installation Considerations	Proper installation is essential for safe and effective lighting. Consider hiring a professional electrician for the installation to ensure compliance with electrical codes and regulations.
Lighting Maintenance	LED lights have a long lifespan, but regular maintenance, such as cleaning fixtures and replacing faulty components, is still necessary to keep the lighting system operating efficiently.
Lighting Cost	LED lights may have a higher upfront cost, but their energy efficiency and longer lifespan result in cost savings over time compared to traditional lighting options.

FAQs

How many lights do I need in my pole barn?

• The number of lights needed in your pole barn depends on the size of the barn, the desired illuminance level, and the type of lighting fixtures used. You can use a lighting calculator or consult with a lighting specialist to determine the appropriate number of lights.

How many lumens per square foot pole barn?

• The recommended lumens per square foot for a pole barn depends on the specific lighting requirements and activities in the barn. For general lighting, a range of 20 to 50 lumens per square foot is common.

How many lumens do I need for a barn light?

• The number of lumens needed for a barn light depends on the size of the barn and the desired brightness. As a rough estimate, you may need around 20 to 50 lumens per square foot for general barn lighting.

How do you calculate the number of lights needed?

• To calculate the number of lights needed, divide the total lumens required for the space by the lumens output of the individual light fixture. This will give you the approximate number of fixtures needed to achieve the desired lighting level.

How far apart should pole lights be?

• The spacing between pole lights depends on the light fixtures’ beam angle, the mounting height, and the desired lighting uniformity. As a general guideline, spacing them at intervals equal to the mounting height is a common practice.

How do you calculate light spacing?

• To calculate light spacing, divide the distance between the lights by the number of lights minus one. This will provide equal spacing between the lights.

How many square feet will 5000 lumens light up?

• The area that 5000 lumens will light up depends on the desired illuminance level. For example, if you want an illuminance of 30 foot-candles, 5000 lumens will cover an area of approximately 166.67 square feet (5000 lumens ÷ 30 lumens per sq. ft.).

How many square feet will 3000 lumens light up?

• Similar to the previous example, if you want an illuminance of 30 foot-candles, 3000 lumens will cover an area of approximately 100 square feet (3000 lumens ÷ 30 lumens per sq. ft.).

How many lumens for 1200 square feet?

• The number of lumens needed for 1200 square feet depends on the desired illuminance level. For general lighting, you might need around 20,000 to 30,000 lumens.

How big should my barn light be?

• The size of your barn light depends on the barn’s dimensions and the desired lighting distribution. Larger barns may require higher-wattage fixtures or multiple smaller fixtures for even illumination.

Is 2000 lumens bright enough for outdoor lighting?

• The sufficiency of 2000 lumens for outdoor lighting depends on the specific application and the area you want to illuminate. For a small outdoor area or accent lighting, 2000 lumens may be sufficient.

How do you calculate lumens for lighting?

• To calculate lumens for lighting, multiply the illuminance level in foot-candles by the area in square feet. The result will give you the total lumens required for the space.

How do you calculate outdoor lighting requirements?

• Outdoor lighting requirements can be calculated by considering factors like the area to be illuminated, the desired illuminance level, the type of lighting fixtures, and the light distribution needed for the application.

How many lights do you need per foot?

• The number of lights needed per foot depends on the desired lighting level and the wattage or lumens output of the individual light fixtures. It can vary based on the specific lighting requirements.

How do you figure how many can lights per square foot?

• To figure out how many can lights per square foot, divide the total lumens required for the space by the lumens output of each can light. This will give you the approximate number of can lights needed.

How much area will 20,000 lumens cover?

• The area that 20,000 lumens will cover depends on the desired illuminance level. For example, if you want an illuminance of 30 foot-candles, 20,000 lumens will cover an area of approximately 666.67 square feet (20,000 lumens ÷ 30 lumens per sq. ft.).

How deep should a hole be for a 20-foot light pole?

• The hole for a 20-foot light pole should be approximately 4 to 5 feet deep to provide a stable foundation.

How many light poles do I need?

• The number of light poles needed depends on the size of the area to be illuminated, the mounting height of the poles, and the lighting distribution requirements.

What is the formula for lighting ratio?

• The lighting ratio is calculated by dividing the illuminance level of the main light source by the illuminance level of the fill light source. The formula is: Lighting Ratio = Main Illuminance / Fill Illuminance.

How do you calculate lighting layout?

• Lighting layout can be calculated by considering the area to be illuminated, the type of lighting fixtures, the desired lighting distribution, and the illuminance level required for the space.

What is the formula for lighting?

• The formula for lighting is: Lighting (Lumens) = Illuminance (Foot-candles) x Area (Square Feet).

How many lumens per square foot for garage lighting?

• The recommended lumens per square foot for garage lighting depends on the desired brightness. For general garage lighting, a range of 20 to 50 lumens per square foot is common.

How many lumens do you need per square foot in a shop?

• The number of lumens needed per square foot in a shop depends on the type of work being done and the desired brightness. For general shop lighting, a range of 50 to 100 lumens per square foot is common.

Is 5000 lumens too bright?

• Whether 5000 lumens is too bright depends on the specific application and the area you want to illuminate. It might be too bright for small spaces but suitable for larger areas or high-ceiling environments.

How many lumens do I need for outdoor garage lighting?

• The number of lumens needed for outdoor garage lighting depends on the garage’s size and the desired brightness. For general lighting, you may need around 20 to 50 lumens per square foot.

How bright is a 6000 lumen light?

• A 6000 lumen light is quite bright and can provide ample illumination for various applications, including outdoor areas and large indoor spaces.

How do you calculate lumens over distance?

• To calculate lumens over a distance, you need to consider the inverse square law of light. The formula is: Illuminance (Foot-candles) = Initial Lumens / (Distance^2).

How bright is 10,000 lumens?

• A 10,000 lumen light is very bright and suitable for illuminating large areas or outdoor spaces.

How many lumens per square foot outdoor?

• The recommended lumens per square foot for outdoor lighting depends on the specific application and the desired brightness. For general outdoor lighting, a range of 20 to 50 lumens per square foot is common.

How far can you see with 1500 lumens?

• The distance you can see with 1500 lumens depends on the beam angle and the surrounding ambient lighting conditions. Generally, 1500 lumens can provide visibility for a few hundred feet in outdoor settings.

How big should barn light be over garage door?

• The size of the barn light over a garage door should be proportional to the door’s size and the garage’s overall design. A common size for garage door lights is around 10 to 12 inches in diameter.

How high should barn lights be mounted?

• The height at which barn lights should be mounted depends on the specific application and the desired lighting coverage. As a general guideline, barn lights are often mounted around 8 to 12 feet above the ground.

Where do you put barn lights?

• Barn lights are typically installed on the exterior walls of barns, above doors, or near entry points to provide illumination for the surrounding areas.

Is 20000 lumens too bright?

• Whether 20,000 lumens is too bright depends on the specific application and the area you want to illuminate. It can be suitable for large outdoor areas but may be overwhelming for small spaces.

Can outdoor lights be too bright?

• Yes, outdoor lights can be too bright, especially in residential areas where excessive light may cause light pollution or disturb neighboring properties.

What is the best LED wattage for outdoor lighting?

• The best LED wattage for outdoor lighting depends on the specific lighting requirements and the size of the area to be illuminated. LED fixtures with a wattage between 10W and 50W are commonly used for outdoor applications.

What is brighter 500 watts or 2000 lumens?

• Lumens is a measure of light output, while watts is a measure of power consumption. The brightness of a light depends on its lumens, not its wattage. In this case, 2000 lumens is brighter than 500 watts.

How bright is 15000 lumens?

• A light with 15,000 lumens is very bright and suitable for illuminating large outdoor areas or high-ceiling indoor spaces.

How bright is 14000 lumens?

• A light with 14,000 lumens is also very bright and can provide ample illumination for various applications.

Is 20000 lumens brighter than 10000 lumens?

• Yes, 20,000 lumens is brighter than 10,000 lumens. Lumens measure the amount of light emitted, so the higher the lumens, the brighter the light.

How many watts per square foot for lighting?

• The watts per square foot for lighting depend on the desired brightness level and the type of lighting fixtures used. For general lighting, a range of 1.5 to 2.5 watts per square foot is common.

Do lumens increase with the number of bulbs?

• Yes, the total lumens output will increase with the number of bulbs used in a lighting setup. More bulbs will provide more light and higher total lumens.

What is OSHA standard for outdoor lighting?

• The Occupational Safety and Health Administration (OSHA) does not have specific standards for outdoor lighting. However, they recommend providing adequate illumination for outdoor work areas to ensure worker safety.

How to design an outdoor lighting system?

• Designing an outdoor lighting system involves considering factors like the area to be illuminated, the type of lighting fixtures, the desired illuminance levels, and energy efficiency.

What are the illumination levels for outdoor lighting?

• The recommended illumination levels for outdoor lighting vary depending on the specific application. For general outdoor areas, a range of 5 to 20 foot-candles is common.

How many feet is 100 string lights?

• The length of 100 string lights can vary depending on the spacing between each bulb. For example, if each bulb is spaced one foot apart, the total length would be 100 feet.

How many feet of lights do I need for a 7ft tree?

• The number of feet of lights needed for a 7-foot tree depends on the spacing between each bulb and the desired level of illumination. As a rough estimate, you may need around 35 to 70 feet of lights.

How many lights do I need for a 30-foot tree?

• The number of lights needed for a 30-foot tree depends on the desired level of illumination and the spacing between each bulb. As a rough estimate, you may need hundreds of lights.

How many lights do I need for 100 square feet?

• The number of lights needed for 100 square feet depends on the desired brightness and the type of lighting fixtures used. It can vary based on the specific lighting requirements.

How far apart should 6-inch LED recessed lights be?

• The spacing between 6-inch LED recessed lights depends on the desired lighting level and the area to be illuminated. As a general guideline, spacing them around 4 to 6 feet apart is common.

How many square feet will 5000 lumens light up?

• The area that 5000 lumens will light up depends on the desired illuminance level. For example, if you want an illuminance of 30 foot-candles, 5000 lumens will cover an area of approximately 166.67 square feet (5000 lumens ÷ 30 lumens per sq. ft.).

How far can 100,000 lumens go?

• The distance that 100,000 lumens can go depends on the beam angle of the light fixture and the surrounding ambient lighting conditions. Generally, a high-lumen light can illuminate a large outdoor area.

How many square feet will 3000 lumens light up?

• Similar to the previous examples, the area that 3000 lumens will light up depends on the desired illuminance level. For example, if you want an illuminance of 30 foot-candles, 3000 lumens will cover an area of approximately 100 square feet (3000 lumens ÷ 30 lumens per sq. ft.).

How far apart should pole lights be?

• The spacing between pole lights depends on the light fixtures’ beam angle, the mounting height, and the desired lighting uniformity. As a general guideline, spacing them at intervals equal to the mounting height is a common practice.

How big of a base do I need for a light pole?

• The size of the base needed for a light pole depends on factors such as the pole’s height, the local weather conditions, and the soil type. A qualified engineer or contractor should be consulted to determine the appropriate base size.

How high should a pole light be?

• The height at which a pole light should be installed depends on the specific application and the desired lighting coverage. Pole lights can range from a few feet to several tens of feet in height.

Does every light pole need a ground rod?

• In some cases, light poles may require grounding for safety reasons. Local electrical codes and regulations should be followed to determine whether a ground rod is necessary.

Should light poles be grounded?

• Yes, light poles should be grounded to ensure electrical safety and protect against electrical hazards, especially in outdoor settings.

Are light poles 100 feet apart?

• The spacing between light poles can vary depending on the type of lighting fixtures used, the desired illuminance level, and the specific lighting requirements of the area. Spacing between light poles can be less than 100 feet in some cases.

What is the 8 to 1 lighting ratio?

• The 8 to 1 lighting ratio is a lighting setup where the main light source provides eight times the illuminance of the fill light source. It is commonly used for dramatic and high-contrast lighting effects.

What is a 4 to 1 lighting ratio?

• The 4 to 1 lighting ratio is a lighting setup where the main light source provides four times the illuminance of the fill light source. It is used for medium-contrast lighting with subtle shadows.

How many watts are parking lot lights?

• The wattage of parking lot lights can vary depending on the type and size of the lights. LED parking lot lights typically range from 40W to 300W or more.

How many outdoor string lights do I need?

• The number of outdoor string lights needed depends on the area to be illuminated, the desired level of brightness, and the spacing between each bulb. The total length of the string lights required can vary.

How do I calculate how many light fixtures I need?

• To calculate the number of light fixtures needed, you can divide the total lumens required for the space by the lumens output of each light fixture.

What is the standard measurement for lighting?

• The standard measurement for lighting is illuminance, which is typically expressed in foot-candles (fc) or lux (lx).

How many feet is 100 string lights?

• The length of 100 string lights can vary depending on the spacing between each bulb. For example, if each bulb is spaced one foot apart, the total length would be 100 feet.

How many lights do I need for a 7ft tree?

• The number of lights needed for a 7-foot tree depends on the spacing between each bulb and the desired level of illumination. As a rough estimate, you may need around 35 to 70 feet of lights.

How many lights do I need for a 30-foot tree?

• The number of lights needed for a 30-foot tree depends on the desired level of illumination and the spacing between each bulb. As a rough estimate, you may need hundreds of lights.

How many lights do you need per foot?

• The number of lights needed per foot depends on the desired lighting level and the wattage or lumens output of the individual light fixtures. It can vary based on the specific lighting requirements.

How do you figure how many can lights per square foot?

• To figure out how many can lights per square foot, divide the total lumens required for the space by the lumens output of each can light. This will give you the approximate number of can lights needed.

How much area will 20,000 lumens cover?

• The area that 20,000 lumens will cover depends on the desired illuminance level. For example, if you want an illuminance of 30 foot-candles, 20,000 lumens will cover an area of approximately 666.67 square feet (20,000 lumens ÷ 30 lumens per sq. ft.).

How deep should a hole be for a 20-foot light pole?

• The hole for a 20-foot light pole should be approximately 4 to 5 feet deep to provide a stable foundation.

How many light poles do I need?

• The number of light poles needed depends on the size of the area to be illuminated, the mounting height of the poles, and the lighting distribution requirements.

What is the formula for lighting ratio?

• The lighting ratio is calculated by dividing the illuminance level of the main light source by the illuminance level of the fill light source. The formula is: Lighting Ratio = Main Illuminance / Fill Illuminance.

How do you calculate lighting layout?

• Lighting layout can be calculated by considering the area to be illuminated, the type of lighting fixtures, the desired lighting distribution, and the illuminance level required for the space.

What is the formula for lighting?

• The formula for lighting is: Lighting (Lumens) = Illuminance (Foot-candles) x Area (Square Feet).

How many lumens per square foot for garage lighting?

• The recommended lumens per square foot for garage lighting depends on the desired brightness. For general garage lighting, a range of 20 to 50 lumens per square foot is common.

How many lumens do you need per square foot in a shop?

• The number of lumens needed per square foot in a shop depends on the type of work being done and the desired brightness. For general shop lighting, a range of 50 to 100 lumens per square foot is common.

Is 5000 lumens too bright?

• Whether 5000 lumens is too bright depends on the specific application and the area you want to illuminate. It might be too bright for small spaces but suitable for larger areas or high-ceiling environments.

How many lumens do I need for outdoor garage lighting?

• The number of lumens needed for outdoor garage lighting depends on the garage’s size and the desired brightness. For general lighting, you may need around 20 to 50 lumens per square foot.

How bright is a 6000 lumen light?

• A 6000 lumen light is quite bright and can provide ample illumination for various applications, including outdoor areas and large indoor spaces.

How do you calculate lumens over distance?

• To calculate lumens over a distance, you need to consider the inverse square law of light. The formula is: Illuminance (Foot-candles) = Initial Lumens / (Distance^2).

How bright is 10,000 lumens?

• A 10,000 lumen light is very bright and suitable for illuminating large areas or outdoor spaces.

How many lumens per square foot outdoor?

• The recommended lumens per square foot for outdoor lighting depends on the specific application and the desired brightness. For general outdoor lighting, a range of 20 to 50 lumens per square foot is common.