Pea Gravel Coverage Calculator

Depth (inches)	Coverage per 1 Cubic Yard (sq ft)	Coverage per 1 Ton (sq ft)	Coverage per 50 lb Bag (sq ft)
1	270 – 300	200 – 220	7 – 8
2	135 – 150	100 – 110	3.5 – 4
3	90 – 100	65 – 75	2.3 – 2.5
4	67 – 75	50 – 55	1.75 – 2
6	45 – 50	33 – 37	1.2 – 1.3

FAQs

How do you calculate pea gravel coverage? Pea gravel coverage is calculated by multiplying the area’s length by its width to determine the square footage. Then, you decide on the desired depth of the pea gravel and use that to calculate the volume needed.

How much pea gravel to cover 100 sq ft? Assuming a depth of about 2 inches, you’d need roughly 1.85 cubic yards of pea gravel to cover 100 sq ft.

How much will a 50 lb bag of pea gravel cover? A 50 lb bag of pea gravel usually covers around 0.5 cubic feet or about 0.0185 cubic yards.

How much pea gravel do I need for 10×10? For a 10×10 area with a 2-inch depth, you’d require approximately 1.85 cubic yards of pea gravel.

How many square feet will 1 yard of pea gravel cover? At a depth of around 2 inches, 1 cubic yard of pea gravel can cover about 135-150 square feet.

How much area will 1 ton of pea gravel cover? With a 2-inch depth, 1 ton of pea gravel can cover roughly 100-110 square feet.

How much is 200 sq ft of pea gravel? For a 2-inch depth, you’d need approximately 1.2 cubic yards of pea gravel to cover 200 sq ft.

Is 2 inches of pea gravel enough? A 2-inch depth of pea gravel is typically sufficient for light foot traffic and decorative purposes. For areas with heavier use or vehicle traffic, you might consider a thicker layer.

How much gravel do I need for a 10×12 shed? Assuming a 2-inch depth, you’d require around 2.22 cubic yards of pea gravel for a 10×12 shed area.

How deep should pea gravel be? A depth of 2 to 4 inches is common for pea gravel in most landscaping applications.

How many square feet will 5 tons of pea gravel cover? With a 2-inch depth, 5 tons of pea gravel can cover approximately 450-500 square feet.

How many bags of pea gravel in a yard? There are around 53-54 bags (50 lb each) of pea gravel in a cubic yard.

How much pea gravel do I need for 150 square feet? For a 2-inch depth, you’d need approximately 1.11 cubic yards of pea gravel to cover 150 sq ft.

What should you put under pea gravel? A weed barrier fabric or geotextile fabric is often recommended under pea gravel to prevent weed growth and aid in drainage.

What size pea gravel is best for walking on? Pea gravel in the 1/4 inch to 1/2 inch range is generally suitable for comfortable walking.

What is the cheapest type of gravel? Crushed stone is often one of the cheaper options for gravel.

How much will 10 yards of gravel cover? With a 2-inch depth, 10 yards of gravel can cover approximately 1,350-1,500 square feet.

How many wheelbarrows in a yard of pea gravel? It typically takes about 14-15 wheelbarrows to transport 1 cubic yard of pea gravel.

How do you spread pea gravel? Use a shovel or rake to evenly spread the pea gravel across the area, and then use a compactor or tamper to compact it slightly.

How much gravel do I need to cover 300 sq ft? For a 2-inch depth, you’d need around 2.22 cubic yards of pea gravel to cover 300 sq ft.

What is 1 yard of pea gravel? One cubic yard of pea gravel is equivalent to 27 cubic feet.

How many yards of gravel do I need for 100 square feet? At a 2-inch depth, you’d require approximately 0.74 cubic yards of pea gravel for 100 sq ft.

How much gravel do I need to cover an area? To determine the gravel needed, calculate the area’s square footage and then decide on the desired depth. Use this depth to calculate the volume of gravel required.

How much pea gravel per fence post? For a typical fence post hole, a small bag of pea gravel should be sufficient to provide drainage.

Why not to use pea gravel? Pea gravel can shift underfoot, making it less suitable for areas with heavy foot traffic. It may also migrate onto lawns or other areas over time.

Do you need a base layer for pea gravel? Using a base layer of compacted crushed stone or gravel can help stabilize the ground and improve drainage before laying pea gravel.

When not to use pea gravel? Avoid using pea gravel for high-traffic areas, as it can be uncomfortable to walk on for extended periods and might not stay in place.

How much gravel do I need for a 12×12 shed? With a 2-inch depth, you’d require around 2.67 cubic yards of pea gravel for a 12×12 shed area.

Can I put a shed directly on gravel? Yes, you can place a shed directly on a gravel surface, but it’s recommended to have a stable and level base to ensure the shed’s stability and longevity.

How much pea gravel do I need for a shed base? For a 10×12 shed base with a 4-inch depth, you’d need approximately 5.6 cubic yards of pea gravel.

How do you keep pea gravel from sinking? Using a sturdy and well-compacted base layer, like crushed stone, beneath the pea gravel can help prevent sinking.

Can you put pea gravel over soil? While you can put pea gravel over soil, it’s recommended to use a weed barrier fabric or base layer to prevent weed growth and improve stability.

Does water go through pea gravel? Yes, pea gravel is permeable and allows water to pass through, making it suitable for drainage purposes.

What area does a 1 ton bag of gravel cover? With a 2-inch depth, a 1 ton bag of gravel can cover around 90-100 square feet.

What is the average size of pea gravel? Pea gravel typically ranges in size from about 1/8 inch to 3/8 inch in diameter.

What size is 100 square feet? A 100 square feet area could be, for example, 10 feet by 10 feet or any other combination that results in 100 square feet.

How do I prepare my yard for pea gravel? Clear the area of any vegetation, level the ground, and consider adding a base layer of crushed stone or compacted gravel for stability.

What are the pros and cons of pea gravel backyard? Pros: Drainage, decorative, permeable. Cons: Can shift, less comfortable for walking, may migrate.

How deep should pea gravel be in backyard? For decorative purposes, a depth of 2 to 4 inches is common in a backyard.

How much does 1 ton of gravel cover? With a 2-inch depth, 1 ton of gravel can cover around 90-100 square feet.

What does 3/8 pea gravel look like? 3/8 pea gravel is roughly the size of small peas, ranging from about 1/8 inch to 3/8 inch in diameter.

How many inches of pea gravel do I need under pavers? For a stable base under pavers, a depth of about 4 to 6 inches of compacted pea gravel is recommended.

What is the best barrier for pea gravel? A geotextile fabric or landscape fabric can be a good barrier to prevent weed growth while allowing water drainage.

Do you need landscape fabric under pea gravel? Using landscape fabric under pea gravel is recommended to prevent weed growth and maintain a tidy appearance.

Does pea gravel attract bugs? Pea gravel doesn’t inherently attract bugs, but if it’s moist and provides hiding places, some insects might find it hospitable.

Is pea gravel good for bare feet? Pea gravel can be uncomfortable to walk on barefoot due to its small, uneven surface.

What is the easiest gravel to walk on? Larger gravel sizes, like 1 inch or more, are generally easier to walk on than smaller sizes.

Is pea gravel a good idea? Pea gravel is a popular choice for landscaping due to its drainage properties and decorative appeal, but its suitability depends on the intended use.

How much will a dump truck load of gravel cover? The coverage of a dump truck load of gravel varies based on the truck’s capacity and the desired depth.

What is the best gravel for no weeds? Crushed stone or angular gravel with larger sizes is less likely to allow weed growth compared to smaller, rounded pea gravel.

Is it cheaper to buy bags of gravel? Buying bulk gravel is often cheaper than purchasing the same amount in bags.

How do I calculate how much pea gravel I need? Multiply the area’s length by its width to find the square footage, then determine the desired depth and calculate the required volume.

How much area will a yard of pea gravel cover? At a 2-inch depth, a yard of pea gravel can cover approximately 135-150 square feet.

How much gravel do I need to cover a 10×10? For a 2-inch depth, you’d need about 0.92 cubic yards of pea gravel to cover a 10×10 area.

How much pea gravel do I need for 100 square feet? Assuming a 2-inch depth, you’d require around 1.85 cubic yards of pea gravel to cover 100 sq ft.

How many 5 gallon buckets in a yard of pea gravel? There are approximately 15-16 standard 5-gallon buckets in a cubic yard of pea gravel.

Will weeds grow through pea gravel? Without a weed barrier, weeds can eventually grow through pea gravel.

Will grass grow through pea gravel? Grass is less likely to grow through pea gravel compared to finer materials, but it’s still possible without a proper barrier.

Does pea gravel drain well? Yes, pea gravel has good drainage properties due to its size and gaps between the stones.

How deep should pea gravel be? A depth of 2 to 4 inches is common for most landscaping applications with pea gravel.

How much gravel do I need for a 10×12 shed? With a 2-inch depth, you’d require approximately 2.22 cubic yards of pea gravel for a 10×12 shed.

How many bags of pea gravel in a yard? There are around 53-54 bags (50 lb each) of pea gravel in a cubic yard.

How many wheelbarrows in a yard of pea gravel? It typically takes about 14-15 wheelbarrows to transport 1 cubic yard of pea gravel.

What is the cheapest type of gravel? Crushed stone is often one of the cheaper options for gravel.

Is pea gravel better than mulch? Both have their benefits. Pea gravel provides good drainage and lasts longer, while mulch helps retain moisture and enrich soil.

How much gravel do I need for 120 sq ft? For a 2-inch depth, you’d need approximately 0.74 cubic yards of pea gravel to cover 120 sq ft.

How much will 10 yards of gravel cover? With a 2-inch depth, 10 yards of gravel can cover approximately 1,350-1,500 square feet.

How much does a 50 lb bag of gravel cover? A 50 lb bag of gravel typically covers around 0.5 cubic feet or about 0.0185 cubic yards.

How much does 3 yards of gravel cover? With a 2-inch depth, 3 cubic yards of gravel can cover around 405-450 square feet.

How much gravel do I need for a 4×4 fence post? A bag of pea gravel should be sufficient to provide drainage for a 4×4 fence post hole.

How many square feet will 2 tons of pea gravel cover? With a 2-inch depth, 2 tons of pea gravel can cover approximately 180-200 square feet.

What needs to go under pea gravel? A well-compacted base layer of crushed stone or gravel is recommended under pea gravel to improve stability and drainage.

What are the disadvantages of pea gravel? Pea gravel can shift underfoot, migrate over time, and might be uncomfortable for extended walking.

Should I put sand down before pea gravel? Using a base layer of compacted crushed stone or gravel is generally better than sand to provide stability under pea gravel.

Why not to use pea gravel? Pea gravel can shift underfoot, migrate, and may not be suitable for high-traffic areas.

Do you need base rock under pea gravel? Using a base layer of compacted crushed stone or gravel is recommended to provide stability and improve drainage under pea gravel.

Do you need to compact pea gravel? Compacting the base layer before laying pea gravel can help create a stable foundation.

How much gravel do I need for a 12×8 shed? With a 2-inch depth, you’d require approximately 2 cubic yards of pea gravel for a 12×8 shed area.

How much pea gravel do I need for a shed base? For a 10×12 shed base with a 4-inch depth, you’d need around 5.6 cubic yards of pea gravel.

How many inches of gravel do I need for a shed foundation? A shed foundation typically requires about 4 to 6 inches of compacted gravel for stability.

Do you need to compact gravel under shed? Yes, compacting the gravel under a shed foundation is important to create a stable base.

How much gravel do I need for a 12×12 shed? With a 2-inch depth, you’d require around 2.67 cubic yards of pea gravel for a 12×12 shed.

Is pea gravel good for shed foundation? Pea gravel can be used for shed foundations as long as it’s properly compacted and leveled. A more substantial base layer might be preferred for heavier structures.