Fence Cost Calculator – Melbourne

Here’s a table with estimated costs based on these factors:

Factor	Estimated Cost Range
Material
– Timber	$50 – $150 per meter
– Colorbond	$60 – $200 per meter
– Brick/Stone	$300 – $800 per meter
– Aluminium	$80 – $250 per meter
Length
– Short (10-20 meters)	$500 – $3,000
– Medium (20-50 meters)	$1,000 – $6,000
– Long (50-100 meters)	$2,000 – $10,000
Height
– Standard (1.8 meters)	Included in material cost
– Extra Height	Add 10-20% to material cost
Labor
– Installation	$50 – $100 per meter
Additional Expenses
– Permits	$100 – $500
– Soil Conditions	$100 – $1,000

Please note that these are rough estimations and actual costs may vary based on market fluctuations, specific requirements, and contractor rates. It’s recommended to get quotes from local suppliers and contractors for accurate pricing.

FAQs

How much does a fence cost per metre in Melbourne?

The cost of a fence per meter in Melbourne can vary depending on factors such as material, height, and installation method. On average, it could range from $60 to $200 per meter.

What is the cheapest fence to have installed?

The cheapest fence to have installed is typically a basic wire or chain-link fence. These can cost around $50 to $100 per meter.

How much is 1 meter of fence?

Approximately $50 to $200, depending on the type of material and style.

How much per metre is fencing?

Fencing can range from $60 to $200 per meter, depending on various factors such as material and style.

Should I pay half for Neighbours fence?

This is subject to local laws and agreements between neighbors. In many places, it’s customary for neighbors to split the cost of a boundary fence.

How much is colorbond fencing per metre in Melbourne?

Colorbond fencing in Melbourne can cost around $80 to $120 per meter, approximately.

How much is 300 ft of fencing?

Estimating an average cost of $20 to $40 per linear foot, 300 feet of fencing could cost roughly $6,000 to $12,000.

How do you put up a budget fence?

You can put up a budget fence by using affordable materials like wire, choosing simpler designs, and doing the installation yourself.

What is the easiest fence to install?

Wire or chain-link fences are often considered the easiest to install because they require minimal digging for posts and are generally lightweight.

Do you need planning permission for a 2m fence?

In some areas, a permit might be required for a 2m fence. It’s best to check with local authorities or council regulations.

What size is a good Neighbour fence?

A typical good neighbor fence is around 6 feet tall, providing adequate privacy without being too imposing.

How much is 200 feet of fence?

Using the same estimated cost per linear foot, 200 feet of fencing could cost around $4,000 to $8,000.

How much should I spend on fencing?

Your budget for fencing will depend on your specific needs, but it’s advisable to allocate at least a few thousand dollars for a quality installation.

Why is fencing so expensive?

Fencing can be expensive due to factors such as material quality, labor costs, property terrain, and additional features like gates or decorative elements.

How much would it cost to fence my garden?

The cost to fence a garden can vary widely based on size, material, and style, but it could range from a few hundred to several thousand dollars.

Can I legally paint my side of Neighbours fence?

In most cases, painting your side of the fence should be fine, but it’s courteous to inform your neighbor about your plans.

Can I replace my fence without Neighbours permission?

You can typically replace your fence without your neighbor’s permission as long as you stay within your property boundaries.

Why do Neighbours get the good side of the fence?

Traditionally, the smoother or more aesthetically pleasing side of the fence faces outward, which is why neighbors often get the “good” side.

How much does fencing cost per metre in Australia?

Fencing costs in Australia can range from $60 to $200 per meter, depending on various factors like materials and location.

Which is cheaper Colorbond or timber fence?

In general, Colorbond fencing tends to be slightly cheaper than timber fencing, but prices can vary based on factors like height and style.

Is Colorbond fencing expensive?

Colorbond fencing can be relatively affordable compared to other types of fencing, but it still represents a significant investment.

How do you calculate fences?

To calculate fencing costs, multiply the length of the area to be fenced by the cost per meter or foot of the chosen fencing material.

What is the cost of constructing a fence 6 feet?

The cost of constructing a 6-foot fence can vary widely depending on the material used, but it could range from $30 to $100 per linear foot.

Can you install a fence yourself?

Yes, you can install a fence yourself if you have the necessary tools, skills, and knowledge of local regulations.

Which side of the fence do you pay for?

Typically, each property owner pays for the fence on their side of the property line.

What is the hardest part of installing a fence?

Digging holes for the fence posts and ensuring they are properly aligned and set can often be the most challenging aspect of fence installation.

How can I make my plain fence look better?

You can make a plain fence look better by adding plants, painting or staining it, incorporating decorative elements, or installing trellises for climbing vines.

What type of fence adds the most value?

Privacy fences, especially those made from durable materials like vinyl or wrought iron, tend to add the most value to a property.

What’s the cheapest way to fence in a garden?

The cheapest way to fence in a garden is typically using wire or chain-link fencing.

What kind of fence lasts the longest?

Materials like vinyl and aluminum tend to last the longest because they are resistant to rot, insects, and weather damage.

Can a Neighbour add to my fence?

Your neighbor generally cannot add to your fence without your permission unless it’s a shared boundary fence.

How close to my Neighbour can I build a fence?

The distance you can build a fence from your neighbor’s property line can vary depending on local regulations. It’s typically a few feet.

Can my Neighbour put up a 6ft fence?

Your neighbor can usually put up a 6ft fence as long as it complies with local regulations and doesn’t encroach on your property.

Who gets the better side of the fence?

Traditionally, the smoother or more aesthetically pleasing side of the fence faces outward, so neighbors often get the “better” side.

Which Neighbour gets the good side of the fence?

Typically, the neighbor who installs the fence gets the smoother or more aesthetically pleasing side facing their property.

Can I erect a fence on my side of the boundary?

Yes, you can usually erect a fence on your side of the boundary as long as it complies with local regulations.

How much is 300 feet of fence?

300 feet of fencing could cost approximately $6,000 to $12,000, depending on the chosen materials and installation method.

What time of year is fencing cheapest?

Fencing materials and labor costs might fluctuate seasonally, but there’s no specific time of year when fencing is consistently cheapest.

Should I pay half for Neighbours fence?

Paying half for a neighbor’s fence is often a common courtesy and may be required by local laws or agreements. However, it’s best to discuss it with your neighbor and refer to local regulations.