EASYJoint Sand is a specialized jointing compound designed for use with paving. It contains polymers that, when activated with water, harden to stabilize and lock the joints between paving stones. EASYJoint Sand is easy to use, water-permeable, and provides a durable, long-lasting solution for maintaining the integrity of your paved surfaces.
Easy Joint Sand Calculator
| Property | Description |
|---|---|
| Product Name | EASYJoint Sand |
| Type | Jointing Compound for Paving |
| Composition | Contains Polymers |
| Activation | Requires Water for Hardening |
| Joint Stabilization | Stabilizes and Locks Paving Joints |
| Permeability | Water-Permeable |
| Durability | Provides Long-Lasting Results |
| Ease of Use | Easy Application |
| Suitable for | Paved Surfaces, Driveways, Patios, etc. |
| Set Time | Typically within Hours (depending on conditions) |
| Coverage | Varies (manufacturer’s recommendation) |
| Application Temperature Range | 5°C to 25°C (41°F to 77°F) |
| Staining Potential | Minimal (when applied correctly) |
| Manufacturer’s Instructions | Follow the provided guidelines for best results |
FAQs
How far does a tub of EASYJoint cover? The coverage of a tub of EASYJoint can vary depending on the size of the joints and the paving slabs, but a rough estimate is around 15-20 square meters for a 15kg tub.
How long does EASYJoint last? EASYJoint can last for several years if properly installed and maintained. However, its longevity can vary depending on factors like weather conditions and traffic.
How long does EASYJoint take to harden? EASYJoint typically takes 24-48 hours to fully harden, but it may vary depending on environmental conditions such as temperature and humidity.
What is the coverage of EASYJoint compound? Coverage can vary, but a rough estimate is around 0.75 to 1.5 kg of EASYJoint per square meter, depending on the joint size.
What is the minimum depth for EASYJoint? The minimum recommended joint depth for EASYJoint is usually around 20-25mm.
Does EASYJoint let water through? EASYJoint is designed to be water-permeable, allowing water to pass through the joints. This helps prevent pooling and allows for efficient drainage.
What is the difference between EASYJoint and EASYJoint pro? EASYJoint Pro is typically formulated for more demanding or commercial applications, offering enhanced durability and performance compared to standard EASYJoint.
Can you seal over EASYJoint? Yes, you can seal over EASYJoint after it has fully cured to enhance its longevity and appearance.
What size gap for EASYJoint? EASYJoint is suitable for joints ranging from approximately 3mm to 40mm, depending on the product variation.
Why is my EASYJoint not going hard? EASYJoint may not harden properly if it hasn’t been mixed correctly, if the weather conditions are unfavorable, or if the joints were not cleaned and prepped adequately.
Is EASYJoint any good? EASYJoint is a popular and effective jointing compound for paving, but its performance depends on proper installation and maintenance.
Can you apply EASYJoint in the rain? It is not recommended to apply EASYJoint in heavy rain or when the joints are wet. The joints should be dry before application.
Can you use EASYJoint dry? Yes, EASYJoint is typically applied to dry joints.
How do you clean EASYJoint? EASYJoint can be cleaned with water and a stiff brush when it is still wet. Once it has cured, it may require more effort to remove any residue.
Can EASYJoint be used on a driveway? Yes, EASYJoint can be used on driveways with suitable joint sizes and depth.
Is EASYJoint porous? EASYJoint is designed to be water-permeable, allowing water to pass through the joints.
Does jointing compound dry hard? Yes, jointing compounds like EASYJoint typically dry to a hard finish, providing stability to paving.
What is the best broom for EASYJoint? A stiff broom or brush is suitable for brushing in EASYJoint.
How long does jointing compound take to harden? Jointing compound like EASYJoint usually takes 24-48 hours to fully harden, but this can vary.
What is an alternative to EASYJoint? An alternative to EASYJoint is another jointing compound designed for paving, or traditional methods like using sand or mortar.
Can you put easy joint on top of easy joint? Yes, you can apply additional EASYJoint on top of existing EASYJoint if needed.
What is the best sand for jointing? For traditional jointing, sharp sand or fine kiln-dried sand is commonly used.
Does EASYJoint stain slabs? EASYJoint is designed not to stain paving slabs when applied correctly.
How wide should paving joints be? Paving joints typically range from 3mm to 10mm, depending on the type of paving and aesthetic preferences.
Is Easyjoint select permeable? EASYJoint Select is designed to be water-permeable, allowing water to pass through the joints.
What is the ratio for patio jointing? The ratio for patio jointing depends on the product used. Follow the manufacturer’s instructions for the specific product.
How long does joint sand take to set? Joint sand typically sets within a few hours to a day, depending on environmental conditions.
Does jointing sand harden? Yes, jointing sand hardens to stabilize paving joints.
Is EASYJoint resin-based? Yes, EASYJoint is a resin-based jointing compound.
What is better than polymeric sand? There are various jointing compounds and methods available, and the choice depends on your specific project requirements and preferences.
Which polymeric sand is best? The best polymeric sand can vary depending on your specific needs and the manufacturer’s reputation. Research and product reviews can help you make an informed choice.
What is the difference between sand and polymeric sand? Polymeric sand contains polymers that help it harden and lock the joints, while regular sand does not have this property.
What precautions should be taken when using jointing compounds? Precautions include wearing protective gear, following manufacturer instructions, working in well-ventilated areas, and avoiding skin contact.
What temperature can you use EASYJoint? EASYJoint is best applied in temperatures between 5°C to 25°C (41°F to 77°F).
Why won’t my joint compound dry? Joint compound may not dry properly if it’s too humid, if there are application issues, or if it’s applied too thickly.
What if it rains after laying slabs? If it rains shortly after laying slabs, take precautions to protect the joints from washing out or becoming too wet.
What is the best mix for patio pointing? The best mix for patio pointing depends on the product you are using. Follow the manufacturer’s recommendations.
Can you top up patio grout? You can top up patio grout if it has settled or eroded over time.
What is the difference between easy grout and EASYjoint? Easy grout is typically used for grouting tiles, while EASYJoint is designed for jointing and stabilizing paving.
How thick can you apply joint compound? The thickness of joint compound application can vary, but it’s generally applied in thin layers, often feathered at the edges.
How long does easy sand 20 joint compound take to dry? Easy Sand 20 is a fast-setting joint compound, and it can dry in as little as 20 minutes to a few hours, depending on conditions.
Can I use joint compound to fill holes? Yes, joint compound can be used to fill holes and cracks in walls and ceilings.
GEG Calculators is a comprehensive online platform that offers a wide range of calculators to cater to various needs. With over 300 calculators covering finance, health, science, mathematics, and more, GEG Calculators provides users with accurate and convenient tools for everyday calculations. The website’s user-friendly interface ensures easy navigation and accessibility, making it suitable for people from all walks of life. Whether it’s financial planning, health assessments, or educational purposes, GEG Calculators has a calculator to suit every requirement. With its reliable and up-to-date calculations, GEG Calculators has become a go-to resource for individuals, professionals, and students seeking quick and precise results for their calculations.