Floor Stripping and Waxing Cost Calculator
| Area Size (in sq. ft.) | Stripping Cost (per sq. ft.) | Waxing Cost (per sq. ft.) | Total Cost (Stripping + Waxing) |
|---|---|---|---|
| 100 – 500 | $0.50 – $1.00 | $0.50 – $1.00 | $100 – $1,000 |
| 501 – 1,000 | $0.40 – $0.80 | $0.40 – $0.80 | $400 – $1,600 |
| 1,001 – 2,000 | $0.30 – $0.70 | $0.30 – $0.70 | $600 – $1,400 |
| 2,001 – 5,000 | $0.25 – $0.60 | $0.25 – $0.60 | $1,000 – $3,000 |
| 5,001 – 10,000 | $0.20 – $0.50 | $0.20 – $0.50 | $1,000 – $5,000 |
| 10,001+ | Prices may vary | Prices may vary | Prices may vary |
FAQs
What’s the average cost of stripping and waxing a floor? The average cost of stripping and waxing a floor can vary depending on factors such as the type of flooring, the condition of the floor, the size of the area, and location. On average, it can cost around $0.50 to $1.50 per square foot.
How do you calculate stripping and waxing floors? To calculate the cost of stripping and waxing floors, multiply the total floor area (in square feet) by the cost per square foot for both stripping and waxing. Then, add these two costs together to get the total cost.
How much does a strip and wax VCT cost per square foot? The cost of strip and wax for Vinyl Composition Tile (VCT) can range from $0.50 to $2.00 per square foot, depending on various factors such as the condition of the floor and the specific services provided.
How many hours does it take to strip and wax a floor? The time it takes to strip and wax a floor can vary depending on the size of the area, the condition of the floor, and the equipment used. It can typically take anywhere from 4 to 8 hours for a 1,000 to 2,000 square foot area.
How many coats of wax after stripping a floor? After stripping a floor, it is recommended to apply 2 to 5 coats of wax, depending on the desired level of shine and protection.
How many square feet will 5 gallons of wax cover? The coverage of wax can vary depending on the product and application method, but on average, 5 gallons of floor wax can cover approximately 2,000 to 4,000 square feet.
How many square feet does 1 gallon of floor wax cover? One gallon of floor wax can cover approximately 400 to 800 square feet, depending on the product and application method.
Is stripping and waxing floors a good business? Stripping and waxing floors can be a profitable business, especially in commercial settings where regular floor maintenance is necessary. However, it requires proper equipment, expertise, and marketing to be successful.
How often should a floor be stripped? The frequency of floor stripping depends on the traffic and use of the area. In commercial settings, it is typically done every 6 to 12 months.
How much does it cost to put vinyl flooring in a 2000 square foot house? The cost of installing vinyl flooring can vary based on the quality and type of vinyl chosen. On average, it can cost between $2,000 to $8,000 for a 2000 square foot house.
How often should you strip and wax VCT flooring? VCT flooring should be stripped and waxed every 6 to 12 months in commercial settings with high foot traffic.
How often should VCT be stripped and waxed? VCT flooring should be stripped and waxed based on its condition and usage, but generally every 6 to 12 months.
Do you mop the floor before you wax it? Yes, it is essential to thoroughly clean and mop the floor before applying wax to ensure proper adhesion and a smooth finish.
Can you strip a floor without a machine? Stripping a floor without a machine is possible but can be labor-intensive. However, using a floor stripping machine is more efficient and effective.
Do you wax strip up or down? When applying wax, it is best to move the mop or applicator in smooth, even strokes in the direction of the floorboards or tiles.
How long does it take to strip a floor? The time it takes to strip a floor can vary based on the size of the area and the condition of the floor. It can take several hours for a typical room.
Can you wax over old wax on floors? It is not recommended to wax over old wax without first stripping the floor. The old wax may prevent proper adhesion and result in an uneven finish.
How long should wax dry before removing? The drying time for wax can vary depending on the product and environmental conditions, but it is usually recommended to allow the wax to dry for at least 30 to 60 minutes before removing excess or applying additional coats.
How far apart should you wax? When applying wax, it is typically recommended to leave a small gap of around 6 inches between each application to ensure even coverage.
What is the calculation for wax? The calculation for wax depends on the size of the area to be waxed and the recommended coverage of the wax product used.
How much floor finish coverage per gallon? The coverage of floor finish per gallon can vary depending on the product and application method, but it can cover approximately 1,500 to 2,000 square feet.
How do you keep waxed tile floors shiny? To keep waxed tile floors shiny, regular cleaning with a neutral pH cleaner and periodic buffing can help maintain their shine.
How do you wax a large floor? Waxing a large floor typically involves dividing the area into smaller sections and applying wax in even strokes, moving along the grain of the floorboards or tiles.
What is the best mop to wax hardwood floors? A microfiber mop is often recommended for waxing hardwood floors as it helps to distribute the wax evenly and avoid streaks.
Should you wear a mask when stripping floors? Wearing a mask while stripping floors is recommended to protect against inhaling dust and chemical fumes.
What is the difference between top scrubbing and stripping and refinishing? Top scrubbing is a lighter maintenance process that removes the top layer of dirt and wax, while stripping and refinishing involves removing all layers of wax to expose the original floor surface.
What is the difference between stripping and scrubbing? Stripping involves removing all layers of wax and finish from the floor, while scrubbing is a lighter process that cleans the surface but leaves the old finish intact.
What are the disadvantages of floor wax? Floor wax can wear off over time, requiring regular maintenance and reapplication. It can also be slippery when wet, posing a safety risk.
How do you neutralize a floor after stripping? To neutralize a floor after stripping, use a neutralizing solution or a mixture of water and white vinegar to remove any remaining chemical residue.
How long should you stay out of the house after refinishing floors? The time required to stay out of the house after refinishing floors can vary depending on the type of finish used. It is typically recommended to wait at least 24 to 48 hours before walking on the floors.
How much does Lowes charge for floor installation? The cost of floor installation at Lowe’s can vary depending on the type of flooring and the size of the area. It is best to get a specific quote from Lowe’s for accurate pricing.
How many square feet is a 12×12 room? A 12×12 room has an area of 144 square feet.
What is the cheapest type of flooring? Vinyl and laminate flooring are generally considered the cheapest types of flooring options.
GEG Calculators is a comprehensive online platform that offers a wide range of calculators to cater to various needs. With over 300 calculators covering finance, health, science, mathematics, and more, GEG Calculators provides users with accurate and convenient tools for everyday calculations. The website’s user-friendly interface ensures easy navigation and accessibility, making it suitable for people from all walks of life. Whether it’s financial planning, health assessments, or educational purposes, GEG Calculators has a calculator to suit every requirement. With its reliable and up-to-date calculations, GEG Calculators has become a go-to resource for individuals, professionals, and students seeking quick and precise results for their calculations.