Convert Decimal Degrees to Meters Calculator

To convert decimal degrees to meters, you can use the approximate conversion factor of 111 kilometers per degree for both latitude and longitude. Multiply the decimal degrees by 111,000 meters to obtain an estimate in meters. This method provides a rough conversion that varies with latitude due to the Earth’s curvature.

Convert Decimal Degrees to Meters Calculator

FAQs

How do you convert degrees decimals to meters?

Converting decimal degrees to meters depends on your specific location on Earth. To estimate this conversion, you can use the following rough approximation:

1 degree of latitude ≈ 111 kilometers

1 degree of longitude ≈ 111 kilometers at the equator, but it decreases as you move towards the poles.

To convert decimal degrees to meters, you can use these approximations. Multiply the decimal degrees by the estimated number of kilometers per degree for both latitude and longitude.

How do you calculate degrees in meters?

To calculate the number of meters in a degree, you can use the approximate values mentioned earlier:

1 degree of latitude ≈ 111 kilometers

1 degree of longitude ≈ 111 kilometers at the equator, but it decreases as you move towards the poles.

So, to find the number of meters in a degree, you can multiply these values by 1,000 to get meters:

1 degree of latitude ≈ 111,000 meters 1 degree of longitude ≈ 111,000 meters (at the equator) Remember that the value for longitude varies depending on your latitude due to the Earth’s curvature.

How do I change decimal degrees to meters in ArcGIS?

In ArcGIS, you can convert decimal degrees to meters using the “Calculate Geometry” tool. Here’s how:

1. Open your attribute table containing the decimal degree values.
2. Right-click on the layer in the Table of Contents.
3. Select “Open Attribute Table.”
4. Click on the “Options” button in the attribute table and choose “Add Field.”
5. Choose a name for your new field (e.g., “Distance_meters”).
6. In the “Field Type” dropdown, select “Double.”
7. In the “Precision” field, specify the number of decimal places you want for your meter values.
8. Click “OK” to create the new field.
9. Right-click on the new field and choose “Calculate Geometry.”
10. In the “Calculate Geometry” dialog, select “Area” or “Length,” depending on your data.
11. In the “Coordinate System” dropdown, choose the appropriate coordinate system for your data.
12. Click “OK” to calculate and populate the field with the values in meters.

How do you measure decimal degrees?

Decimal degrees are typically measured using a GPS device, surveying equipment, or software that provides latitude and longitude values. GPS receivers, for example, can display coordinates in decimal degrees. Surveyors use theodolites and other instruments to measure angles and calculate decimal degrees.

What is 0.25 degree resolution in KM?

A 0.25-degree resolution corresponds to a grid or spacing where each grid cell represents an area of approximately 28 kilometers by 28 kilometers (assuming we’re talking about both latitude and longitude). This means that the distance between each grid point, in any direction, is roughly 28 kilometers.

What unit is decimal degrees?

Decimal degrees are a unit of measurement used for expressing latitude and longitude coordinates on the Earth’s surface. They represent angles in degrees, but unlike degrees, minutes, and seconds (DMS), decimal degrees use a decimal point to indicate fractions of a degree.

What is 1 degree in meters?

As previously mentioned, 1 degree of latitude is approximately equal to 111 kilometers, and 1 degree of longitude is also approximately equal to 111 kilometers at the equator. Therefore, 1 degree in meters is approximately 111,000 meters (111 kilometers).

What is 0.001 degrees latitude in meters?

0.001 degrees of latitude is approximately equal to 111 meters. This is because 1 degree of latitude is about 111,000 meters, so 0.001 degrees is 0.001 multiplied by 111,000 meters, which equals 111 meters.

How do you convert degrees to degrees and minutes?

To convert decimal degrees to degrees and minutes, you can use the following steps:

1. Keep the whole number part of the decimal degree as the degrees.
2. Multiply the decimal part by 60 to get the minutes.
3. The result will be in the format of degrees (°) and minutes (‘), for example, 45°30’.

How do you read decimal degrees on a map?

Decimal degrees on a map are read just like regular degrees, minutes, and seconds. The whole number part represents the degrees, and the decimal part represents the fraction of a degree. For example, a latitude coordinate of 37.7500 would be read as:

• Degrees: 37
• Minutes: 0
• Seconds: 0

How do I convert decimal degrees to meters in QGIS?

In QGIS, you can convert decimal degrees to meters using the “Calculate Geometry” function or by using field calculator expressions. Here’s a simplified way using the field calculator:

1. Open your attribute table containing the decimal degree values.
2. Toggle editing mode if necessary.
3. Create a new field to hold the meter values (e.g., “Distance_meters”).
4. Open the Field Calculator.
5. Use an expression like this to convert latitude degrees to meters:pythonCopy coderound("Latitude" * 111000, 2) # 111000 meters per degree for latitude Replace “Latitude” with the actual field name containing your latitude values.
6. Click “OK” to calculate and populate the new field with meter values.

For longitude, you need to adjust the factor depending on your latitude since the length of a degree of longitude varies with latitude. Use the following formula to calculate longitude in meters:

pythonCopy code

round("Longitude" * (111000 * cos(radians("Latitude"))), 2)

Replace “Longitude” and “Latitude” with the appropriate field names in your data.

How do you change all decimal points to midline?

It’s not clear what you mean by “change all decimal points to midline.” If you could provide more context or clarify your question, I’d be happy to help.

What is the range of decimal degrees?

The range of decimal degrees for latitude is typically from -90.0000° (south pole) to +90.0000° (north pole). For longitude, the range is from -180.0000° (180 degrees west) to +180.0000° (180 degrees east).

How do you convert degrees to coordinates?

Degrees are often used as coordinates in geographical systems. To convert degrees to coordinates, you simply use the degrees value as a coordinate. For example, a latitude of 40.7128° and a longitude of -74.0060° represent the coordinates of a location in New York City.

How do you convert decimals to minutes?

To convert decimal degrees to minutes:

1. Take the decimal portion of the degree value.
2. Multiply it by 60 to get the minutes.

For example, to convert 37.75° to degrees and minutes:

1. Decimal portion: 0.75
2. 0.75 * 60 = 45

So, 37.75° is equivalent to 37°45′.

What is 0.05 degree resolution in M?

A 0.05-degree resolution corresponds to a grid or spacing where each grid cell represents an area of approximately 5.55 kilometers by 5.55 kilometers. This is based on the assumption that 1 degree of latitude is approximately 111 kilometers.

How many km is 0.25 degree * 0.25 degree?

To find the area represented by a grid of 0.25 degrees by 0.25 degrees, you can multiply the lengths of the sides:

0.25 degrees * 111 kilometers/degree ≈ 27.75 kilometers

So, a grid of 0.25 degrees by 0.25 degrees covers an area of approximately 27.75 kilometers by 27.75 kilometers, or roughly 771.56 square kilometers.

How many km is 0.01 degrees?

To find the distance covered by 0.01 degrees (assuming latitude), you can use the approximation:

0.01 degrees * 111 kilometers/degree ≈ 1.11 kilometers

So, 0.01 degrees is approximately equal to 1.11 kilometers.

How many degrees is 100 meters?

To find how many degrees are approximately equivalent to 100 meters, you need to take into account your latitude because the length of a degree of longitude varies with latitude. As a rough estimate, at the equator:

1 degree of longitude ≈ 111 kilometers

So, to find the degrees for 100 meters:

100 meters / 111,000 meters (1 degree) ≈ 0.0009 degrees

This is a very rough estimate, and the actual value will vary with latitude.

What is the degree for 1.5 to 1?

The phrase “1.5 to 1” doesn’t represent a specific degree value. If you have more context or information about what you’re trying to convey, please provide it, and I’ll be happy to assist further.

How many km is 1 degree by 1 degree?

The distance covered by 1 degree by 1 degree varies depending on your latitude due to the Earth’s curvature. However, as a rough approximation:

• At the equator (0° latitude), 1 degree by 1 degree is approximately 111 kilometers by 111 kilometers, resulting in an area of about 12,321 square kilometers.
• As you move towards higher latitudes, the east-west distance covered by 1 degree of longitude decreases.

How many minutes are in 1 degree longitude?

There are 60 minutes in 1 degree of longitude. This is a standard conversion in geographic coordinate notation.

How many meters is 1 minute of latitude?

The length of 1 minute of latitude is approximately 1,852 meters (1 nautical mile) or 1,900 meters (1 statute mile). This value is relatively constant and does not vary with latitude.

Is 1 degree longitude equal to 1 degree latitude?

No, 1 degree of longitude is not equal to 1 degree of latitude in terms of distance. The length of 1 degree of longitude varies with latitude, becoming shorter as you move towards the poles. However, 1 degree of latitude remains relatively constant in length, at about 111 kilometers.

How to convert decimal degrees into latitude and longitude?

To convert decimal degrees into latitude and longitude coordinates, follow these conventions:

• Latitude is represented by a decimal degree value, with positive values for the northern hemisphere (0 to 90°) and negative values for the southern hemisphere (0 to -90°).
• Longitude is represented by a decimal degree value, with positive values for east of the Prime Meridian (0 to 180°) and negative values for west of the Prime Meridian (0 to -180°).

For example:

• Decimal degrees 40.7128 for latitude and -74.0060 for longitude correspond to the coordinates of New York City.

How is 1 degree equal to 60 minutes?

In the system of measuring angles, such as latitude and longitude, 1 degree is divided into 60 minutes (‘). Each minute is further divided into 60 seconds (“). So, the relationship is:

1 degree (°) = 60 minutes (‘) = 3,600 seconds (“).

This is a standard convention for measuring angles, and it allows for finer granularity in expressing angular measurements.

What is 1 minute in degrees?

1 minute (‘) is equal to 1/60th of a degree (°). So, 1 minute = 1/60 degrees.

How to convert decimal degrees to degrees and decimal minutes?

To convert decimal degrees to degrees and decimal minutes, follow these steps:

1. Keep the whole number part of the decimal degree as the degrees.
2. Multiply the decimal part by 60 to get the decimal minutes.

For example, to convert 37.75° to degrees and decimal minutes:

1. Degrees: 37
2. Decimal minutes: 0.75 * 60 = 45

So, 37.75° is equivalent to 37°45.0′.

What is an example of a decimal degree coordinate?

A decimal degree coordinate example could be:

Latitude: 40.7128° Longitude: -74.0060°

This represents the coordinates of New York City.

How do you read degrees and minutes on a map?

To read degrees and minutes on a map, follow these steps:

1. Locate the latitude and longitude lines or grid on the map.
2. Find the point of interest on the map and determine which lines it falls between.
3. Read the degrees value directly from the lines.
4. Estimate the number of minutes between the degree lines by visually dividing the space.
5. Combine the degrees and minutes to get the complete coordinates.

For example, if a point falls between the 30° and 31° latitude lines and is about halfway between them, you could estimate it as 30°30′.

How do you shift decimal points?

Shifting decimal points means moving the decimal point in a number to the left or right to change its value. To shift a decimal point to the right, you increase the number, and to shift it to the left, you decrease the number. For example:

• Shifting 3.5 to the right by one place becomes 35.
• Shifting 3.5 to the left by one place becomes 0.35.

Where do I change the decimal separator?

Changing the decimal separator in software or applications depends on the specific program you’re using. In most cases, you can find this option in the settings or preferences menu. Look for options related to “number format” or “regional settings.” You can typically choose between a comma (,) or a period (.) as the decimal separator.