Calculate Full Overlay Cabinet Door Sizes

FAQs

1. How do you size a full overlay cabinet door? Full overlay cabinet doors are typically sized to cover the entire face of the cabinet, leaving very little or no reveal around the edges. To size a full overlay cabinet door, measure the opening of the cabinet box and subtract the desired overlay (usually 1/16 inch to 1/8 inch) on all sides to determine the door size.
2. How do you calculate door overlay? Door overlay is calculated by subtracting the cabinet opening size from the door size. The overlay is the amount by which the door extends beyond the cabinet opening.
3. What is the size of cabinet door overlay? The size of the cabinet door overlay can vary, but it’s commonly around 1/16 inch to 1/8 inch on all sides.
4. How much clearance do I need for full overlay cabinet doors? You typically need a small clearance of 1/16 inch to 1/8 inch between full overlay cabinet doors to allow them to open and close without rubbing against each other.
5. What is the width of a full overlay face frame? The width of a full overlay face frame can vary depending on the manufacturer and design, but it’s often around 1.5 inches to 2.5 inches wide.
6. What is the difference between 1/2 overlay and full overlay cabinet hinges? 1/2 overlay hinges are designed for cabinets where the door covers only half of the cabinet frame when closed. Full overlay hinges are used for cabinets where the door covers the entire cabinet frame when closed.
7. What is a 1/2 inch overlay door? A 1/2 inch overlay door covers half of the cabinet frame when closed, leaving a 1/2 inch reveal around the door.
8. How much overlay is a full overlay hinge? A full overlay hinge is designed to work with cabinet doors that cover the entire cabinet frame, resulting in minimal or no reveal when the doors are closed.
9. What is a 1/2 overlay door? A 1/2 overlay door covers half of the cabinet frame when closed, leaving a 1/2 inch reveal around the door.
10. What is a standard cabinet overlay? The standard cabinet overlay can vary depending on regional preferences and manufacturer specifications. However, a common standard is around 1/16 inch to 1/8 inch on all sides for full overlay cabinets.
11. What is the difference between inset cabinet doors and full overlay? Inset cabinet doors are set into the cabinet frame, creating a flush and seamless appearance when closed. Full overlay doors, on the other hand, completely cover the cabinet frame, leaving minimal or no reveal.
12. What is the actual size of a cabinet door? The actual size of a cabinet door depends on the cabinet opening size and the desired overlay. It is typically slightly larger than the cabinet opening to ensure full coverage.
13. Can I change my cabinet doors to full overlay? Yes, you can change your cabinet doors to full overlay doors if your cabinet boxes are compatible with this style. You may need to replace the hinges and hardware as well.
14. Can you put full overlay doors on framed cabinets? Yes, it is possible to put full overlay doors on framed cabinets, but it may require modifications to the cabinet frame and the use of appropriate hinges and hardware.
15. What is a full overlay kitchen cabinet door? A full overlay kitchen cabinet door is a type of door that covers the entire face of the cabinet, leaving minimal or no reveal around the edges for a modern and seamless appearance.
16. Is full overlay the same as face frame? Full overlay refers to the way the cabinet doors cover the cabinet frame, while face frame refers to the frame structure on the front of some cabinets. They are related but not the same.
17. What is the minimum gap between cabinet doors? The minimum gap between cabinet doors can vary, but it’s typically around 1/16 inch to 1/8 inch to allow for smooth opening and closing without rubbing.
18. How do you measure a face frame cabinet door? To measure a face frame cabinet door, measure the width and height of the cabinet opening, taking into account the desired overlay and any allowances for clearance.
19. What is the most common overlay on cabinet doors? The most common overlay on cabinet doors is around 1/16 inch to 1/8 inch on all sides for full overlay cabinets, but regional preferences and design trends can influence this.
20. Are full overlay cabinets better? Whether full overlay cabinets are better depends on your design preferences and needs. They provide a modern, seamless look, but inset or partial overlay cabinets may be preferred in traditional or specific design styles.
21. Which is better, overlay or inset cabinets? The choice between overlay and inset cabinets depends on your design preferences. Overlay cabinets are more common and offer a modern look, while inset cabinets provide a classic, flush appearance.
22. How do you measure for a 1/2 overlay door? To measure for a 1/2 overlay door, subtract 1/2 of the overlay width from the cabinet opening size to determine the door size.
23. What size door for a half overlay? The size of the door for a half overlay cabinet depends on the cabinet opening size and the desired 1/2 inch overlay. Subtract 1/2 inch from both the width and height of the cabinet opening.
24. Is 3/4 overlay the same as full overlay? No, 3/4 overlay is not the same as full overlay. 3/4 overlay doors cover 3/4 of the cabinet frame, leaving a larger reveal compared to full overlay doors.
25. Can latches be used on full overlay cabinets? Yes, latches can be used on full overlay cabinets, but the type of latch and its installation may vary depending on the specific cabinet and latch design.
26. Do full overlay cabinets have center stiles? Full overlay cabinets typically do not have a center stile between adjacent cabinet doors, creating a continuous, unbroken appearance.
27. How do you measure for inset cabinet doors? Measuring for inset cabinet doors involves measuring the cabinet opening size and specifying that the doors should be flush with the face frame.