Board-on-Board Fence Picket Calculator

Board-on-Board Fence Picket Calculator

Enter Fence Length (in feet): Enter Picket Width (in inches): Enter Picket Spacing (in inches): Calculate Number of Pickets

FAQs

1. How many pickets do I need for a board-on-board fence? The number of pickets needed for a board-on-board fence depends on the fence length, picket width, and spacing. To calculate the number of pickets required, you need to know the total length of the fence and the width of each picket, including the spacing between pickets.

2. How do you calculate board-on-board fencing? To calculate board-on-board fencing, determine the total length of the fence and the width of each picket, including the spacing. Then, use the formula: Total Pickets = (Fence Length * 12) / (Picket Width + Spacing) * 2 + 1. This formula accounts for both sides of the fence and adds an extra picket for the end post.

3. How far apart should board-on-board pickets be? The spacing between board-on-board pickets is typically around 1.5 to 2 inches. However, it may vary depending on personal preference and the desired level of privacy.

4. What is the formula for picket fence? The formula for a picket fence depends on the type of picket fence you are building. For a basic picket fence, you can use the formula: Total Pickets = Fence Length / Picket Spacing + 1.

5. How many 1×6 boards do I need for a fence? The number of 1×6 boards needed for a fence depends on the fence length and the width of each 1×6 board, including any spacing. To calculate, divide the total length of the fence by the width of one 1×6 board (including spacing).

6. How many pickets do I need for 100 feet? To determine the number of pickets needed for 100 feet, you need to know the width of each picket and the spacing between them. Use the formula: Total Pickets = (100 * 12) / (Picket Width + Spacing) * 2 + 1.

7. Is board-on-board fence more expensive? Board-on-board fences can be more expensive due to the increased amount of wood needed for the overlapping design, which provides extra privacy and durability.

8. How far apart should board-on-board wood fence be? The spacing between board-on-board wood fence pickets is typically around 1.5 to 2 inches.

9. Is it better to nail or screw fence boards? Using screws to attach fence boards is generally better than nails as they provide a stronger and more secure hold, reducing the likelihood of the boards becoming loose over time.

10. Should pickets face in or out? Pickets in a board-on-board fence typically face alternating directions on each side, providing a visually appealing appearance from both sides of the fence.

11. Should you leave a gap between fence boards? Leaving a small gap between fence boards allows for natural expansion and contraction of the wood due to temperature and moisture changes.

12. How high should pickets be off the ground? Pickets should be installed with a gap of about 2 to 5 inches off the ground to prevent rot and water damage.

13. How do you calculate even picket spacing? To calculate even picket spacing, divide the total length of the fence by the desired number of pickets. The result will give you the spacing needed between each picket.

14. How do you calculate space between pickets? To calculate the space between pickets, subtract the width of each picket from the total fence length and then divide the result by the number of gaps between pickets.

15. How do you build a spaced picket fence? To build a spaced picket fence, install the fence posts, attach horizontal rails, and then attach the pickets with the desired spacing between them.

16. How far apart should 1×6 deck boards be? For deck boards, the recommended spacing is usually around 1/8 inch to 1/4 inch between each board.

17. What is the actual width of a 1×6 fence board? The actual width of a 1×6 fence board can vary slightly, but it is usually around 5.5 inches.

18. Can you use 1×6 for fence boards? Yes, 1×6 boards are commonly used for fence boards, especially in board-on-board fence designs.

19. What is the average size of a fence picket? The average size of a fence picket can vary, but it is typically around 5/8 inch to 3/4 inch thick, 4 to 6 inches wide, and 4 to 8 feet long.

20. What size gap between fence pickets? The size of the gap between fence pickets is usually around 1.5 to 2 inches in board-on-board fences.

21. How much is 300 ft of fencing? The cost of 300 feet of fencing can vary depending on the type and quality of the materials used and the labor costs in your area.

22. Are board-on-board fences good? Board-on-board fences are popular for their durability, increased privacy, and visually appealing design from both sides.

23. What is the advantage of board-on-board fence? The advantage of a board-on-board fence is its increased privacy due to overlapping pickets, providing a solid barrier and aesthetic appeal from both sides.

24. How long does board-on-board fence last? With proper maintenance and care, a well-built board-on-board fence can last for several decades.

25. Why do you double board a fence? Double boarding a fence, such as in a board-on-board design, increases privacy and creates a stronger and more durable fence.

26. Can you put pickets on both sides of fence? Yes, in board-on-board fences, pickets are installed on both sides of the fence, creating a visually pleasing design from both angles.

27. How high should fence boards be off the ground? Fence boards should be installed with a gap of about 2 to 5 inches off the ground to prevent moisture damage and rot.

28. Are 2-inch nails too long for fence pickets? 2-inch nails are often suitable for attaching fence pickets, but the length of nails may vary depending on the thickness of the pickets and the fence design.

29. What is the hardest part of installing a fence? The hardest part of installing a fence can be ensuring precise measurements, properly aligning posts, and maintaining consistent spacing between pickets.

30. What kind of nail gun do you use for fence pickets? For fence pickets, a finish nail gun or a framing nail gun with the appropriate nail size is commonly used.

31. Should you give your neighbor the good side of a fence? The good side of the fence, also known as the finished or more aesthetically pleasing side, is traditionally installed facing outward towards the neighbor’s property.

32. Who gets the bad side of the fence? The bad side of the fence, which may have visible posts and rails, typically faces inward towards the property owner who installed the fence.

33. Can a neighbor screw into my fence? Neighbors should not make any modifications to your fence without your permission, as it may be considered trespassing or property damage.

34. Should top of fence be level? Yes, the top of the fence should be level to ensure a consistent and aesthetically pleasing appearance.

35. How do I keep my fence board from warping? To prevent fence boards from warping, use properly dried and treated wood, apply a sealant or paint to protect from moisture, and ensure even spacing between pickets.

36. Do pressure-treated fence pickets shrink? Pressure-treated fence pickets may experience some shrinkage as they dry, which is normal for wood products.

37. Can fence boards touch the ground? Ideally, fence boards should not touch the ground to avoid water absorption and rot. A small gap of a few inches is recommended.

38. Would it matter if the picket fence is tilted instead of being vertical? A slightly tilted picket fence may not be a problem, but it is generally better to keep the pickets vertical for a neater and more traditional appearance.

39. What is the maximum distance between picket fence posts? The maximum distance between picket fence posts depends on the type of fence and the material used. As a general guideline, it is typically around 6 to 8 feet.

40. What is picket fence pattern? A picket fence pattern refers to the arrangement of pickets on the fence, which can include different styles such as spaced pickets or board-on-board.

41. What is the formula for evenly spaced sets? The formula for evenly spaced sets depends on the total length and the desired spacing between sets. It can be calculated as Total Sets = Total Length / (Set Width + Spacing).

42. What is the ideal picket spacing? The ideal picket spacing depends on personal preference and the desired level of privacy. It is commonly around 1.5 to 2 inches for board-on-board fences.

43. How many pickets per 8-foot section board on board? The number of pickets per 8-foot section in a board-on-board fence depends on the width of each picket and the spacing between them. Use the formula mentioned earlier to calculate it.

44. What is proper fence spacing? Proper fence spacing depends on the type of fence and the desired level of privacy. It is generally recommended to have around 1.5 to 2 inches of spacing for picket fences.

45. What is the spacing for metal fence pickets? The spacing for metal fence pickets depends on the design and style of the fence. It is typically similar to wooden picket fences, around 1.5 to 2 inches.

46. Can I use 1×6 for deck boards? Yes, 1×6 boards can be used for deck boards, especially for traditional wood decking.

47. Should deck boards be tight or spaced? Deck boards should be spaced slightly to allow for water drainage and expansion of the wood.

48. Should deck boards be butted together? Deck boards should have a small gap between them to allow for natural expansion and contraction due to temperature and moisture changes.

49. How much gap does a board-on-board fence need? Board-on-board fences typically have a small gap between the overlapping pickets, around 1.5 to 2 inches.

50. How thick should fence pickets be? Fence pickets are usually around 5/8 inch to 3/4 inch thick.

51. How far apart should pickets be on a 6-foot privacy fence? For a 6-foot privacy fence, the pickets are usually spaced around 1.5 to 2 inches apart.