Aluminium sheet weight varies depending on thickness and dimensions. For example, a 4×8 sheet of 0.125-inch thick aluminium weighs about 12.32 pounds. Thinner sheets, like 0.032-inch thick ones, weigh around 3.14 pounds in the same size. These weights are approximate due to manufacturing variations and the density of aluminium, which is about 0.098 lbs/in³.
Aluminium Sheet Weight Calculator
| Thickness (inches) | Size (feet) | Size (inches) | Area (square feet) | Weight (lbs) |
|---|---|---|---|---|
| 0.032 | 4×8 | 48×96 | 32 | 3.14 |
| 0.040 | 4×8 | 48×96 | 32 | 3.92 |
| 0.050 | 4×8 | 48×96 | 32 | 4.90 |
| 0.063 | 4×8 | 48×96 | 32 | 6.18 |
| 0.080 | 4×8 | 48×96 | 32 | 7.84 |
| 0.090 | 4×8 | 48×96 | 32 | 8.82 |
| 0.125 | 4×8 | 48×96 | 32 | 12.32 |
| 0.188 | 4×8 | 48×96 | 32 | 18.51 |
| 0.250 | 4×8 | 48×96 | 32 | 24.68 |
| 0.375 | 4×8 | 48×96 | 32 | 37.02 |
| 0.500 | 4×8 | 48×96 | 32 | 49.36 |
FAQs
How do you calculate the weight of aluminum sheets? The weight of aluminum sheets can be calculated by multiplying the volume (area × thickness) by the density of aluminum.
How much does aluminum weight per foot? The weight of aluminum per foot varies depending on the alloy and its form (sheet, plate, bar, etc.). Aluminum weighs around 0.0975 to 0.098 pounds per cubic inch, so the weight per foot will depend on the cross-sectional area of the specific form.
What is the density of aluminium sheets? The density of aluminum is approximately 0.098 pounds per cubic inch (lbs/in³) or 2.7 grams per cubic centimeter (g/cm³).
How much does 6061 aluminum weigh? The weight of 6061 aluminum varies based on its form (sheet, plate, bar, etc.) and dimensions. As a reference, 6061 aluminum weighs around 0.098 pounds per cubic inch (lbs/in³).
How much does aluminum sheet metal weight per square foot? The weight of aluminum sheet metal per square foot varies depending on the thickness of the sheet. On average, it can range from about 0.7 to 3 pounds per square foot.
How do you calculate sheet weight? Sheet weight can be calculated by multiplying the area of the sheet by the density of the material. Weight = Area × Thickness × Density.
What is the weight per square inch of aluminum? The weight per square inch of aluminum depends on the thickness of the material. Thinner aluminum sheets will have lower weight per square inch, while thicker sheets will have higher weight.
What is the specific weight of aluminium? The specific weight of aluminum is approximately 2.7 grams per cubic centimeter (g/cm³), which is the same as its density.
How much does 1 4 aluminum weigh? The weight of 1/4-inch thick aluminum (0.25 inches) will depend on its dimensions. For example, a 1/4-inch thick sheet that’s 1 foot by 1 foot would weigh about 7.23 pounds.
Is aluminum sheet heavy? Aluminum sheet is relatively lightweight compared to many other materials, especially metals like steel. However, its weight depends on the thickness and dimensions of the sheet.
What is the standard thickness of aluminum sheets? The standard thickness of aluminum sheets can vary widely, but common ranges are from 0.016 inches (0.4 mm) to 0.25 inches (6.35 mm) or even thicker for specialized applications.
What is the specific gravity of aluminum sheet? The specific gravity of aluminum is approximately 2.7, which means it is 2.7 times denser than water.
How much does 6061 aluminum weight per square foot? The weight of 6061 aluminum per square foot depends on its thickness. On average, it can range from about 0.184 to 0.765 pounds per square foot.
How much does 6061 aluminum weight per foot? The weight of 6061 aluminum per foot depends on its form and dimensions. For reference, a solid bar of 6061 aluminum, 1 foot long and 1 inch in diameter, would weigh about 1.23 pounds.
What is the difference between 6061 aluminum and aluminum? 6061 aluminum is a specific alloy within the aluminum family. “Aluminum” is a general term for the element, while “6061 aluminum” refers to an alloy composition that contains specific amounts of elements like magnesium and silicon.
How much does aluminum sheet metal weight? The weight of aluminum sheet metal varies widely based on its thickness and dimensions. As a general range, it can be from about 0.7 to 3 pounds per square foot.
How much does a 4×8 sheet of metal weigh? The weight of a 4×8 sheet of metal depends on the type of metal, its thickness, and its density. Common metals like steel and aluminum can range from about 32 to 288 pounds for a 4×8 sheet.
How thick is 20 gauge aluminum sheet? A 20 gauge aluminum sheet is approximately 0.032 inches (0.81 mm) thick.
What is the standard weight of sheet metal? The standard weight of sheet metal varies based on the type of metal (e.g., steel, aluminum), its gauge (thickness), and dimensions. There’s no single standard weight applicable to all sheet metals.
How much does sheet metal weigh? The weight of sheet metal depends on its type, gauge, and dimensions. It can vary widely, ranging from a few ounces per square foot to several pounds.
How do you find weight with diameter and length? To find the weight of a cylindrical object with diameter and length, you need to know the material’s density. The formula is Weight = Volume × Density, where Volume = π × (Diameter/2)^2 × Length.
How much does a square foot of 24 gauge aluminum weight? The weight of a square foot of 24 gauge aluminum varies based on the thickness of the aluminum. As a rough estimate, it might be around 0.653 pounds per square foot.
How much heavier is aluminum than wood? Aluminum is significantly denser than wood, so it is much heavier than wood of the same volume.
How much heavier is steel to aluminum? Steel is denser than aluminum, so it is heavier than aluminum of the same volume.
Is aluminium heavier than mild steel? No, mild steel is generally denser and heavier than aluminum of the same volume.
How much does pure aluminum weigh? The weight of pure aluminum depends on its form (solid, sheet, bar, etc.) and dimensions. It weighs around 0.0975 to 0.098 pounds per cubic inch (lbs/in³).
Is aluminum stronger than steel per weight? Aluminum is not as strong as steel on a per-weight basis. Steel is generally stronger than aluminum for a given volume.
How much does 1 4 sheet metal weigh per square foot? The weight of 1/4-inch thick sheet metal (steel, aluminum, etc.) per square foot depends on the type of metal and its density. As a reference, it can be around 10 to 15 pounds per square foot.
Is aluminum 1 3 the weight of steel? Aluminum is lighter than steel, but the weight ratio is not exactly 1:3. The density of aluminum is about one-third that of steel, but other factors also play a role in the overall weight of structures.
How thick is 4 gauge aluminum? The thickness of 4 gauge aluminum can vary depending on the specific gauge system being used. In the American Wire Gauge (AWG) system, a 4-gauge wire is approximately 5.19 mm (0.2043 inches) in diameter.
What is the cheapest aluminum? The price of aluminum can vary based on factors like market conditions and alloy type. Generally, aluminum alloys with higher percentages of recycled content tend to be cheaper.
Is sheet metal same as aluminum? Sheet metal is a term that refers to metal sheets of various materials, including aluminum. Aluminum sheet metal specifically refers to sheets made from aluminum.
Is aluminum sheet hard or soft? The hardness of aluminum sheets can vary based on the alloy and heat treatment. Some aluminum alloys can be quite hard, while others are softer and more malleable.
How thick is 18 gauge aluminum sheet? An 18 gauge aluminum sheet is approximately 0.0403 inches (1.02 mm) thick.
How thick is 24 gauge aluminum sheet? A 24 gauge aluminum sheet is approximately 0.0201 inches (0.51 mm) thick.
How thick is 22 gauge aluminum sheet? A 22 gauge aluminum sheet is approximately 0.0253 inches (0.64 mm) thick.
What is the difference between density and specific gravity? Density is the mass of a substance per unit volume, usually measured in kilograms per cubic meter (kg/m³) or pounds per cubic inch (lbs/in³). Specific gravity is the ratio of the density of a substance to the density of a reference substance (usually water).
What is 13.6 specific gravity? A specific gravity of 13.6 is quite high and generally not associated with common materials. It’s more likely to be a value used in specialized applications or contexts.
Is specific gravity the same as density? No, specific gravity and density are related but not the same. Specific gravity is a dimensionless ratio, while density has units of mass/volume.
Is 5052 or 6061 more expensive? The cost of 5052 and 6061 aluminum alloys can vary based on market conditions, availability, and specific applications. Generally, 5052 may be more affordable than 6061.
Is aluminium 6061 cheap? Aluminum alloy 6061 is commonly used and relatively affordable compared to some other specialized aluminum alloys.
How strong is 1 4 6061 aluminum? The strength of 1/4-inch thick 6061 aluminum depends on various factors including its temper (heat treatment) and intended use. It is generally considered to have good strength-to-weight ratio properties.
How thick is 6061 aluminum sheet? 6061 aluminum sheet thickness can vary widely based on the intended application. Common thicknesses range from 0.032 inches (0.81 mm) to thicker options.
Is 6061 aluminum easy to machine? Aluminum alloy 6061 is known for its machinability and is often used in applications where machining is required. It can be machined using various methods with the right tools.
What is the strength of 6061 aluminum compared to steel? The strength of 6061 aluminum is generally lower than that of most steels. Steel has a higher tensile strength than aluminum, but aluminum has a better strength-to-weight ratio.
Why is 6061 so popular? Aluminum alloy 6061 is popular due to its excellent combination of strength, machinability, and weldability. It is used in a wide range of applications including aerospace, automotive, and structural components.
What is Aluminium 6061 equivalent to? Aluminum alloy 6061 is equivalent to several international designations, including EN AW-6061 (European), ISO AlMg1SiCu (International), and UNS A96061 (United States).
What is the alternative to 6061 aluminum? Depending on the specific requirements, other aluminum alloys like 7075, 2024, and 5052 can be alternatives to 6061 aluminum for different applications.
How much does aluminum extrusion weight per foot? The weight of aluminum extrusion per foot depends on the profile’s shape, dimensions, and alloy. It can range from a few ounces to several pounds per linear foot.
Is aluminum sheet metal cheaper than steel? Aluminum sheet metal can be cheaper than steel depending on the specific alloy, thickness, and market conditions.
How much does a 4 x8 x3 16 sheet of steel weigh? The weight of a 4x8x3/16 inch sheet of steel depends on the specific type of steel and its density. It can range from around 156 to 217 pounds.
How much does 4×8 10 gauge sheet metal weight? The weight of a 4×8 10 gauge sheet of metal depends on the type of metal and its density. For reference, 10 gauge steel is approximately 0.1345 inches thick.
How much does a galvanized sheet of metal weigh? The weight of a galvanized sheet of metal depends on the type of metal (steel, aluminum, etc.), its gauge, and dimensions.
What is the difference between 18 gauge and 20 gauge aluminum? The difference between 18 gauge and 20 gauge aluminum is their thickness. 18 gauge is thicker than 20 gauge.
Is 16 gauge aluminum thicker than 18 gauge? No, 16 gauge aluminum is thicker than 18 gauge aluminum.
How thick is 16 gauge Aluminium? A 16 gauge aluminum sheet is approximately 0.0508 inches (1.29 mm) thick.
How thick is 32 gauge sheet metal? The thickness of 32 gauge sheet metal can vary based on the specific gauge system being used. In the American Wire Gauge (AWG) system, a 32-gauge wire is approximately 0.00795 inches (0.2019 mm) in diameter.
How thick is 14 gauge sheet metal? The thickness of 14 gauge sheet metal can vary based on the specific gauge system being used. In the American Wire Gauge (AWG) system, a 14-gauge wire is approximately 0.0785 inches (1.99 mm) in diameter.
How do you calculate Aluminium section weight? To calculate the weight of an aluminum section, you need to know the cross-sectional area and the density of aluminum. Weight = Cross-sectional Area × Length × Density.
How do you find weight with length, width, and thickness? To find the weight of a rectangular object with length, width, and thickness, you need to know the density of the material. Weight = Volume × Density, where Volume = Length × Width × Thickness.
How do you calculate weight per square foot? To calculate weight per square foot, you divide the total weight of the material by the total area it covers.
How much does aluminum weigh per foot? The weight of aluminum per foot depends on the alloy and its form (sheet, plate, bar, etc.). Aluminum weighs around 0.0975 to 0.098 pounds per cubic inch, so the weight per foot will depend on the cross-sectional area of the specific form.
How heavy is a 4×8 sheet of 1/4 steel? The weight of a 4×8 sheet of 1/4-inch thick steel depends on the specific type of steel and its density. It can range from around 192 to 290 pounds.
How much does 1/4 aluminum weigh? The weight of 1/4-inch thick aluminum (0.25 inches) will depend on its dimensions. For example, a 1/4-inch thick sheet that’s 1 foot by 1 foot would weigh about 7.23 pounds.
What material is lighter than aluminium? Hydrogen and helium are two of the lightest materials, even lighter than aluminum.
What is stronger, wood, or aluminium? Aluminum is generally stronger than wood on a per-weight basis, but wood can have higher strength-to-weight ratios in certain applications.
What materials are lighter than aluminum? Materials lighter than aluminum include hydrogen, helium, and some lightweight composite materials.
How much lighter is aluminum compared to steel? Aluminum is significantly lighter than steel. Aluminum’s density is about one-third that of steel, leading to its much lower weight.
Is aluminum pound for pound stronger than steel? In general, aluminum is not pound-for-pound stronger than steel. Steel is stronger than aluminum for the same amount of material.
How much heavier is steel compared to aluminum? Steel is denser and heavier than aluminum. Aluminum’s density is about one-third that of steel, so steel is roughly three times heavier than an equivalent volume of aluminum.
What is the strength-to-weight of aluminum vs. steel? The strength-to-weight ratio of aluminum vs. steel varies depending on the specific alloy and grade. Aluminum generally has a lower density, giving it a better strength-to-weight ratio compared to most steel alloys.
GEG Calculators is a comprehensive online platform that offers a wide range of calculators to cater to various needs. With over 300 calculators covering finance, health, science, mathematics, and more, GEG Calculators provides users with accurate and convenient tools for everyday calculations. The website’s user-friendly interface ensures easy navigation and accessibility, making it suitable for people from all walks of life. Whether it’s financial planning, health assessments, or educational purposes, GEG Calculators has a calculator to suit every requirement. With its reliable and up-to-date calculations, GEG Calculators has become a go-to resource for individuals, professionals, and students seeking quick and precise results for their calculations.