Pipe Weight Calculator
FAQs
How do you calculate weight per foot of a pipe?
To calculate the weight per foot of a pipe, you can use the following formula:
Weight per foot = (Outer diameter – Wall thickness) x Wall thickness x 10.69
Here, the outer diameter and wall thickness should be in the same unit of measurement, such as inches. The result will be in pounds per foot.
How much does a foot of steel pipe Schedule 40 weigh?
The weight of a foot of steel pipe Schedule 40 depends on its size (outer diameter) and wall thickness. Here is a general weight range for Schedule 40 steel pipe:
- 1/2-inch pipe: 0.85 – 1.27 pounds per foot
- 3/4-inch pipe: 1.13 – 1.68 pounds per foot
- 1-inch pipe: 1.68 – 2.41 pounds per foot
- 2-inch pipe: 3.65 – 5.03 pounds per foot
- 3-inch pipe: 5.81 – 7.58 pounds per foot
- 4-inch pipe: 7.58 – 10.02 pounds per foot
Please note that these weight ranges are approximate and may vary depending on the specific manufacturer and material composition.
What is the weight of 20 feet square pipe?
The weight of a 20-foot square pipe depends on its size (width and wall thickness) and material. Without specifying the dimensions and material, it is challenging to provide an accurate weight estimation.
How much does 2 7/8 oilfield pipe weight per foot?
The weight of 2 7/8 oilfield pipe per foot depends on the specific type of pipe and its wall thickness. Oilfield pipe is typically specified by its nominal weight per unit length (e.g., pounds per foot or kilograms per meter). For 2 7/8 oilfield pipe, the weight can range from approximately 6.5 pounds per foot (9.72 kilograms per meter) to 8.7 pounds per foot (12.97 kilograms per meter) for various wall thicknesses.
What is the formula for pipe weight?
The formula for calculating the weight of a pipe is:
Weight = (π/4) x (Outer diameter² – Inner diameter²) x Length x Density
Here, π (pi) is a mathematical constant approximately equal to 3.14159. The outer diameter and inner diameter should be in the same unit of measurement, such as inches. Length refers to the length of the pipe, and density is the density of the material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
How do you calculate weight per foot?
To calculate weight per foot, you need to know the dimensions (outer diameter, wall thickness) and material density. The formula is:
Weight per foot = (Outer diameter – Wall thickness) x Wall thickness x Density
The outer diameter, wall thickness, and density should be in the same unit of measurement, such as inches.
How much does steel pipe weight per foot?
The weight of steel pipe per foot depends on its size (outer diameter) and wall thickness. Here are some approximate weight ranges for steel pipe:
- 1/2-inch pipe: 0.85 – 1.27 pounds per foot
- 3/4-inch pipe: 1.13 – 1.68 pounds per foot
- 1-inch pipe: 1.68 – 2.41 pounds per foot
- 2-inch pipe: 3.65 – 5.03 pounds per foot
- 3-inch pipe: 5.81 – 7.58 pounds per foot
- 4-inch pipe: 7.58 – 10.02 pounds per foot
Please note that these weight ranges are approximate and may vary depending on the specific manufacturer and material composition.
How much does Schedule 40 steel pipe weigh per foot with water?
When filled with water, the weight of Schedule 40 steel pipe per foot will be slightly higher due to the added weight of the water. The weight increase depends on the size of the pipe and the amount of water inside. As a rough estimate, you can add approximately 3.4 pounds per foot for each gallon of water in the pipe.
How much does Schedule 40 aluminum pipe weight per foot?
The weight of Schedule 40 aluminum pipe per foot depends on its size (outer diameter) and wall thickness. Here is a general weight range for Schedule 40 aluminum pipe:
- 1/2-inch pipe: 0.24 – 0.35 pounds per foot
- 3/4-inch pipe: 0.33 – 0.49 pounds per foot
- 1-inch pipe: 0.49 – 0.70 pounds per foot
- 2-inch pipe: 1.06 – 1.46 pounds per foot
- 3-inch pipe: 1.68 – 2.19 pounds per foot
- 4-inch pipe: 2.19 – 2.90 pounds per foot
Please note that these weight ranges are approximate and may vary depending on the specific manufacturer and material composition.
How much does a 2 by 2 hollow pipe weight?
The weight of a 2-inch by 2-inch hollow pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How much does 150×150 square pipe weight?
The weight of a 150×150 square pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
What is the weight of 2 2 steel pipe?
The weight of a 2-inch by 2-inch steel pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
What schedule is 2 3 8 oilfield pipe?
Oilfield pipe is typically specified by its nominal weight per unit length (e.g., pounds per foot or kilograms per meter) rather than by schedule. The schedule designation is commonly used for standard pipe sizes in various industries, but oilfield pipe may have different specifications. Therefore, the schedule of 2 3/8 oilfield pipe cannot be determined without additional information.
What is the weight of 2 7 8 tubing?
The weight of 2 7/8 tubing (oilfield pipe) per foot depends on the specific type of tubing and its wall thickness. Tubing is typically specified by its nominal weight per unit length (e.g., pounds per foot or kilograms per meter). For 2 7/8 tubing, the weight can range from approximately 6.5 pounds per foot (9.72 kilograms per meter) to 8.7 pounds per foot (12.97 kilograms per meter) for various wall thicknesses.
How much does Schedule 80 steel pipe weigh per foot?
The weight of Schedule 80 steel pipe per foot depends on its size (outer diameter) and wall thickness. Here is a general weight range for Schedule 80 steel pipe:
- 1/2-inch pipe: 1.02 – 1.48 pounds per foot
- 3/4-inch pipe: 1.36 – 1.95 pounds per foot
- 1-inch pipe: 2.04 – 2.93 pounds per foot
- 2-inch pipe: 4.23 – 5.82 pounds per foot
- 3-inch pipe: 6.68 – 8.66 pounds per foot
- 4-inch pipe: 8.66 – 11.41 pounds per foot
Please note that these weight ranges are approximate and may vary depending on the specific manufacturer and material composition.
How do you calculate the weight of a hollow steel pipe?
To calculate the weight of a hollow steel pipe, you can use the following formula:
Weight = (π/4) x [(Outer diameter² – Inner diameter²) x Length] x Density
Here, π (pi) is a mathematical constant approximately equal to 3.14159. The outer diameter and inner diameter should be in the same unit of measurement, such as inches. Length refers to the length of the pipe, and density is the density of the steel material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
What is the formula to calculate weight of hollow square pipe?
To calculate the weight of a hollow square pipe, you can use the following formula:
Weight = [Side A – Side B] x Wall thickness x Length x Density
Here, Side A and Side B represent the outer dimensions of the square pipe, and Wall thickness is the thickness of the pipe’s walls. Length refers to the length of the pipe, and Density is the density of the material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
How do you find weight with length, width, and thickness?
To find the weight of an object with length, width, and thickness, you need to know the density of the material. The formula is:
Weight = Length x Width x Thickness x Density
Here, Length, Width, and Thickness should be in the same unit of measurement, such as inches or feet, and Density is the density of the material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
How many lbs per foot?
“Lbs per foot” refers to pounds per foot, which is a unit of weight. It represents the weight of a given material or object per linear foot. For example, if a material weighs 10 pounds per foot, it means that every foot of that material weighs 10 pounds.
What is the best way to calculate weight?
The best way to calculate weight depends on the object or material you are working with. In general, you need to know the dimensions (length, width, thickness) and the density of the material. By multiplying the dimensions and density, you can calculate the weight. It is important to ensure that all dimensions are in the same unit of measurement.
What is the weight formula used to calculate?
The weight formula used to calculate weight depends on the specific object or material being measured. However, in general, the weight formula involves multiplying the dimensions (length, width, thickness) of the object by its density. The exact formula may vary depending on the shape and nature of the object.
What is the weight of mild steel pipe?
The weight of mild steel pipe depends on its size (outer diameter), wall thickness, and length. Without specifying these details, it is challenging to provide an accurate weight estimation.
Is standard pipe weight?
Standard pipe weight refers to the weight of a pipe that adheres to specific industry standards and specifications. The weight of a standard pipe depends on its size (outer diameter), wall thickness, and material. Different standards, such as ASTM, ANSI, or API, may have different weight specifications for pipes of various sizes and materials.
How much does 6-inch pipe weight per foot?
The weight of 6-inch pipe per foot depends on its schedule (wall thickness) and material. Without specifying the schedule and material, it is challenging to provide an accurate weight estimation.
What does SCH 40 pipe mean?
SCH 40 stands for Schedule 40, which is a standardized pipe schedule used in various industries. The schedule refers to the wall thickness of the pipe. SCH 40 pipe has a thicker wall compared to SCH 20, but it is thinner than SCH 80. The exact wall thickness for SCH 40 pipe varies depending on the size of the pipe.
What is the weight of 4-inch steel pipe?
The weight of 4-inch steel pipe depends on its schedule (wall thickness) and material. Without specifying the schedule and material, it is challenging to provide an accurate weight estimation.
How much weight can a 3/4-inch black pipe hold?
The weight that a 3/4-inch black pipe can hold depends on various factors, including the specific type of pipe, its wall thickness, and the type of load being applied. Engineering calculations and load analysis are typically required to determine the load-bearing capacity for a specific application.
What is the weight of 40 * 40mm pipe?
The weight of a 40mm by 40mm pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How much does 1.5 Schedule 40 aluminum pipe weigh per foot?
The weight of 1.5 Schedule 40 aluminum pipe per foot depends on its wall thickness. Without specifying the wall thickness, it is challenging to provide an accurate weight estimation.
What is the weight of 40*40 MS pipe?
The weight of a 40mm by 40mm MS (mild steel) pipe depends on its wall thickness. Without specifying the wall thickness, it is challenging to provide an accurate weight estimation.
How much does 2 schedule 40 pipe weight per foot?
The weight of 2-inch Schedule 40 pipe per foot depends on its wall thickness. Without specifying the wall thickness, it is challenging to provide an accurate weight estimation.
How much does a 40x40x2 square tube weight?
The weight of a 40mm by 40mm square tube with a wall thickness of 2mm depends on the material. Without specifying the material, it is challenging to provide an accurate weight estimation.
What is the weight of 2-inch by 1-inch square pipe?
The weight of a 2-inch by 1-inch square pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How much does a 100×100 box pipe weight?
The weight of a 100mm by 100mm box pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How much does a 2×2 square pipe weigh?
The weight of a 2-inch by 2-inch square pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How much does a 100×50 pipe weight?
The weight of a 100mm by 50mm pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How much does a 2.5-inch steel pipe weigh?
The weight of a 2.5-inch steel pipe depends on its schedule (wall thickness) and material. Without specifying the schedule and material, it is challenging to provide an accurate weight estimation.
What is the weight of a 2.5-inch MS square pipe?
The weight of a 2.5-inch MS (mild steel) square pipe depends on its wall thickness. Without specifying the wall thickness, it is challenging to provide an accurate weight estimation.
What is the difference between SCH 10 and SCH 40?
SCH 10 and SCH 40 are schedule designations for pipes that indicate their wall thicknesses. The main difference between SCH 10 and SCH 40 is the thickness of the walls. SCH 40 pipes have thicker walls compared to SCH 10 pipes. The exact wall thickness for each schedule can vary depending on the size of the pipe.
What is Schedule 40 pipe called?
Schedule 40 pipe is a standardized pipe schedule used in various industries. It refers to pipes with a specific wall thickness, which is thicker than SCH 20 but thinner than SCH 80. The exact wall thickness for Schedule 40 pipe varies depending on the size of the pipe.
What is the weight of 2 3/8 tubing?
The weight of 2 3/8 tubing (oilfield pipe) per foot depends on the specific type of tubing and its wall thickness. Tubing is typically specified by its nominal weight per unit length (e.g., pounds per foot or kilograms per meter). For 2 3/8 tubing, the weight can range from approximately 4.7 pounds per foot (7.00 kilograms per meter) to 6.4 pounds per foot (9.51 kilograms per meter) for various wall thicknesses.
What is the weight of 2-inch hollow round pipe?
The weight of a 2-inch hollow round pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
What is the wall thickness of 2 7/8 oilfield pipe?
The wall thickness of 2 7/8 oilfield pipe can vary depending on the specific type of pipe and its intended use. Oilfield pipe is available in different schedules (wall thicknesses) designated by numbers such as 40, 80, or 160. The exact wall thickness for 2 7/8 oilfield pipe will depend on the specified schedule.
What is the difference between N80 and L80 tubing?
N80 and L80 are grades of casing and tubing used in the oil and gas industry. The main difference between N80 and L80 is their chemical composition and mechanical properties. N80 is a general-purpose grade with higher tensile strength and hardness, while L80 is a higher-strength grade suitable for sour service conditions, which means it has resistance to hydrogen sulfide (H2S) corrosion.
Is Schedule 80 pipe heavier than Schedule 40?
Yes, Schedule 80 pipe is generally heavier than Schedule 40 pipe. Schedule 80 pipe has thicker walls, which increases its weight per foot compared to Schedule 40 pipe. The exact weight difference between Schedule 80 and Schedule 40 pipe will depend on the size and material of the pipe.
Is Schedule 80 pipe extra heavy?
Yes, Schedule 80 pipe is considered extra heavy compared to other schedules. Schedule 80 has thicker walls than lower schedule numbers, which makes it more robust and capable of withstanding higher pressures. The increased wall thickness contributes to the higher weight and strength of Schedule 80 pipe.
How thick is 1 sch 80?
The wall thickness of 1″ Schedule 80 pipe is typically around 0.179 inches. However, it is important to note that the exact wall thickness can vary slightly depending on manufacturing tolerances and specific standards.
What is the formula for weight of steel pipe?
The formula for calculating the weight of a steel pipe is:
Weight = (π/4) x [(Outer diameter² – Inner diameter²) x Length] x Density
Here, π (pi) is a mathematical constant approximately equal to 3.14159. The outer diameter and inner diameter should be in the same unit of measurement, such as inches. Length refers to the length of the pipe, and density is the density of the steel material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
What is the weight of 1-inch square hollow pipe?
The weight of a 1-inch square hollow pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
How do you calculate the weight of steel?
To calculate the weight of steel, you need to know the dimensions (length, width, thickness) and density of the steel material. The formula is:
Weight = Length x Width x Thickness x Density
Here, Length, Width, and Thickness should be in the same unit of measurement, such as inches or feet, and Density is the density of the steel material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
What is the weight formula for seamless pipe?
The weight formula for a seamless pipe is the same as for any other type of pipe. It involves multiplying the dimensions (outer diameter, inner diameter, length) of the pipe by the density of the material. The exact formula may vary depending on the shape and nature of the object.
How much does a 1.5×1.5 square pipe weight?
The weight of a 1.5-inch by 1.5-inch square pipe depends on its wall thickness and material. Without specifying the wall thickness and material, it is challenging to provide an accurate weight estimation.
What is the standard weight of square pipe?
The standard weight of a square pipe depends on its dimensions (length, width, thickness) and material. Standard weights for various sizes of square pipes are typically available in industry-specific standards or reference tables. Without specifying the dimensions and material, it is challenging to provide an accurate standard weight estimation.
What is the formula for pipe weight?
The formula for calculating the weight of a pipe is:
Weight = (π/4) x (Outer diameter² – Inner diameter²) x Length x Density
Here, π (pi) is a mathematical constant approximately equal to 3.14159. The outer diameter and inner diameter should be in the same unit of measurement, such as inches. Length refers to the length of the pipe, and density is the density of the material, typically expressed in pounds per cubic inch (lb/in³) or pounds per cubic foot (lb/ft³).
How do you calculate weight from diameter and length?
To calculate the weight of a cylindrical object, such as a pipe, using its diameter and length, you need to know the density of the material. The formula is as follows:
Weight = (π/4) x Diameter² x Length x Density
Here, π (pi) is a mathematical constant approximately equal to 3.14159. Diameter is the measurement across the circular cross-section of the object, Length is the length of the object, and Density is the density of the material.
How do you calculate weight per square foot?
To calculate weight per square foot, you need to know the weight per unit area and the area of the object or material. The formula is:
Weight per square foot = Weight per unit area x Area
Here, Weight per unit area refers to the weight of the material per unit of area (e.g., pounds per square foot), and Area is the total area of the object or material in square feet.
What is 89 inch-pounds in foot-pounds?
To convert inch-pounds to foot-pounds, divide the value by 12 since there are 12 inches in a foot. Therefore, 89 inch-pounds is equal to:
89 inch-pounds / 12 = 7.42 foot-pounds (rounded to two decimal places).
How do you calculate pound per linear foot?
To calculate pounds per linear foot, you need to know the weight per unit length and the length of the object. The formula is:
Pounds per linear foot = Weight per unit length x Length
Here, Weight per unit length refers to the weight of the object per unit of length (e.g., pounds per foot), and Length is the total length of the object in feet.
Is 12 inch-pounds 1 foot-pound?
No, 12 inch-pounds is not equal to 1 foot-pound. There are 12 inches in a foot, so 12 inch-pounds is equal to 1 foot-pound.
GEG Calculators is a comprehensive online platform that offers a wide range of calculators to cater to various needs. With over 300 calculators covering finance, health, science, mathematics, and more, GEG Calculators provides users with accurate and convenient tools for everyday calculations. The website’s user-friendly interface ensures easy navigation and accessibility, making it suitable for people from all walks of life. Whether it’s financial planning, health assessments, or educational purposes, GEG Calculators has a calculator to suit every requirement. With its reliable and up-to-date calculations, GEG Calculators has become a go-to resource for individuals, professionals, and students seeking quick and precise results for their calculations.