Harley Cable Length Calculator

The length of Harley-Davidson clutch and throttle cables can vary based on the specific model and handlebar setup. Harley provides cables of different lengths to accommodate various configurations. To determine the correct cable length, it’s essential to consider the motorcycle’s year, model, and handlebar type. Consult the Harley-Davidson parts catalog or a dealership for accurate cable length options.

Harley Cable Length Calculator





Total Cable Length: 0 inches

Harley ModelYear RangeClutch Cable Length (inches)Throttle Cable Length (inches)
Sportster XL2019 – 20237032
Dyna FXD2017 – 20227536
Softail FLST2018 – 20237834
Touring FLHT2020 – 20238038

FAQs


What is the formula for calculating cable length?
The formula for calculating cable length depends on the context, but in general, you can use the formula: Length = π * Diameter * Turns, where Diameter is the diameter of the cable coil, and Turns is the number of times the cable is wound around the coil.

How long is a stock Harley clutch cable? The length of a stock Harley clutch cable can vary depending on the specific Harley model and year. Harley-Davidson offers different cable lengths for various models and handlebar setups.

How do you measure motorcycle cable length? To measure motorcycle cable length, you can use a flexible measuring tape or string. Place one end at the starting point of the cable and measure along the cable’s path to the ending point. Ensure the cable is fully extended and not twisted.

How do you measure a Harley throttle cable? Measure a Harley throttle cable by following the cable from the grip to the throttle body. Use a measuring tape or string to measure the length of the cable along its route.

How do you find the maximum length of a cable? The maximum length of a cable depends on factors like the cable’s type, gauge, and application. Consult the cable manufacturer’s specifications or guidelines to determine the maximum length for a specific purpose.

Can you measure cable length with a multimeter? No, a multimeter is not typically used to measure cable length. It is used for electrical measurements such as voltage, current, and resistance.

See also  Round to the Nearest Cent Calculator

How do you measure a Harley clutch cable? Measure a Harley clutch cable by tracing it from the clutch lever to the clutch assembly. Use a measuring tape or string to measure the length of the cable along its path.

How much play in a Harley clutch cable? The recommended play or free play for a Harley clutch cable is typically around 1/16 to 1/8 of an inch at the clutch lever. This ensures that the clutch disengages properly without excessive tension on the cable.

How long do you soak Harley clutch plates? Harley clutch plates don’t typically require soaking. Soaking is more common for wet clutches in other motorcycle types. Harley-Davidson motorcycles often use dry clutches.

Which device can determine the length of a cable? A measuring tape, ruler, or length measuring tool can determine the length of a cable.

How many cable lengths in a mile? There are 5,280 feet in a mile, and a cable length is approximately 607.6 feet. Therefore, there are approximately 8.69 cable lengths in a mile.

How long is one cable in length? One cable length is approximately 607.6 feet or 185.32 meters.

Why do Harleys have two throttle cables? Harleys often have two throttle cables for redundancy and safety. In case one cable fails or gets stuck, the other can control the throttle to prevent accidents.

Does it matter how long a throttle cable is? The length of a throttle cable matters to ensure proper operation and fitment. It should be the correct length for the specific motorcycle model and handlebar setup.

How do you measure for new cables on a motorcycle? To measure for new cables on a motorcycle, determine the desired cable path and length. Measure the existing cable if available or use a flexible measuring tape or string to follow the desired route.

What is cable length tolerance? Cable length tolerance refers to the allowable variation in cable length from the specified or nominal length. It ensures that cables meet performance standards within a certain acceptable range.

What is the maximum length we should have a single-run cable and why? The maximum length for a single-run cable depends on factors such as cable type, gauge, and application. Excessive length can result in signal degradation, voltage drop, or power loss, so it should adhere to manufacturer recommendations.

See also  Sausage Meat to Fat Ratio Calculator

What is the maximum length of a line-level cable? The maximum length of a line-level audio cable depends on factors like cable quality and impedance. Typically, line-level audio cables can extend up to 100 feet (30 meters) without significant signal degradation.

How do you measure cable size manually? To measure cable size manually, use a caliper or micrometer to measure the diameter of the cable or wire. Alternatively, refer to the cable’s specifications provided by the manufacturer.

Does cable length affect voltage? Yes, cable length can affect voltage in electrical circuits. Longer cables can result in voltage drop due to resistance, which may affect the performance of devices.

How much slack should a clutch cable have? A clutch cable should have a small amount of slack, typically 1/16 to 1/8 of an inch at the clutch lever. This allows for proper disengagement without excessive tension.

How much play should be in the clutch cable? The recommended play or free play for a clutch cable is typically around 1/16 to 1/8 of an inch at the clutch lever.

How do you adjust the length of a clutch cable? The length of a clutch cable is typically adjusted at the clutch lever or perch using an adjustment nut or screw. Loosening or tightening this adjustment changes the cable length.

How much free play on Harley clutch lever? Harley-Davidson recommends 1/16 to 1/8 inch of free play at the clutch lever for proper clutch operation.

How do I know if I need a new clutch cable on a motorcycle? Signs of needing a new clutch cable include increased difficulty in disengaging the clutch, fraying or damage to the cable, or a clutch lever that doesn’t return to its normal position.

How often do you need to replace a clutch cable on a motorcycle? The lifespan of a clutch cable varies depending on usage and maintenance. It may last several years, but it should be inspected regularly, and replacement is necessary if signs of wear or damage are evident.

What happens if you don’t soak clutch plates? Clutch plates that require soaking and aren’t properly lubricated may experience premature wear and clutch slippage.

Should I use dry or wet clutch Harley? Harley-Davidson motorcycles often use dry clutches, so it’s essential to use the type of clutch recommended for your specific Harley model to ensure proper operation.

See also  Pool Pump Run Time Calculator

Is soaking clutch plates necessary? Soaking clutch plates is necessary for some wet clutches to ensure proper lubrication and cooling, but Harley-Davidson motorcycles often use dry clutches that do not require soaking.

How does the length of the cable affect the quality of the signal? The length of a cable can affect the quality of a signal in electrical and electronic applications. Longer cables can introduce signal degradation due to resistance and capacitance, potentially leading to reduced signal quality or strength.

Does the length of a cable affect the signal quality or strength? Yes, the length of a cable can affect both the signal quality and strength, particularly in audio and video applications. Longer cables can result in signal degradation, leading to a weaker or lower-quality signal.

What device is used to extend cable length? Signal repeaters or extenders, also known as signal boosters or amplifiers, are devices used to extend cable length while maintaining signal quality and strength.

Leave a Comment