Asphalt Sealer Calculator

Asphalt Sealer Calculator

Enter Area to be Sealed (in square feet):

FAQs

1. How many square feet does 1 gallon of asphalt sealer cover?
   • Approximately 100 to 150 square feet.
2. How many square feet will 5 gallons of asphalt sealer cover?
   • Roughly 500 to 750 square feet.
3. How much asphalt sealant do I need?
   • It depends on the size of the area you want to seal. Calculate the square footage of your driveway, then divide by the coverage per gallon to determine the amount needed.
4. How do I calculate how much driveway sealer I need?
   • Measure the square footage of your driveway and divide it by the coverage rate of the sealer per gallon.
5. How many feet does a 5-gallon bucket of sealer cover?
   • Approximately 500 to 750 linear feet for a single coat.
6. How much does 5 gallons of Sealcoating cover?
   • Typically, 500 to 750 square feet for one coat.
7. Can you seal asphalt too much?
   • Yes, excessive sealing can lead to a buildup that may crack or peel over time. Generally, it’s recommended to reseal every 2-5 years.
8. Can you put 2 coats driveway sealer on?
   • Yes, applying two thin coats is often recommended for better coverage and durability.
9. How far does 5 gallons of driveway sealer go?
   • About 500 to 750 square feet for one coat.
10. How many square feet does a 55-gallon drum of asphalt sealer cover?
    • Approximately 5,500 to 8,250 square feet for one coat.
11. Is it better to apply driveway sealer with a brush or squeegee?
    • Many professionals prefer squeegees for a smoother and more even application, but brushes can be used for smaller areas or touch-ups.
12. What is the best temperature to seal asphalt?
    • Typically, it’s best to apply sealer when the temperature is between 50°F to 85°F (10°C to 30°C) and no rain is expected for at least 24 hours.
13. How much sealer per square foot?
    • About 0.01 to 0.02 gallons per square foot for a single coat.
14. How many square feet does a bucket of sealer cover?
    • Around 500 to 750 square feet for one coat, depending on the sealer and application method.
15. How many square feet does a 4.75-gallon driveway sealer cover?
    • Approximately 475 to 712.5 square feet for one coat.
16. What is the best driveway sealer?
    • The best sealer depends on your specific needs and preferences. Research and consult with professionals for recommendations.
17. How much does it cost to top coat an asphalt driveway?
    • The cost varies widely based on the size of your driveway and labor rates in your area. It could range from a few hundred to several thousand dollars.
18. Can you buy asphalt in a 5-gallon bucket?
    • Yes, you can typically purchase asphalt patch or repair products in 5-gallon buckets.
19. Is Sealcoating worth the money?
    • Sealcoating can extend the life of your asphalt, but its value depends on the condition of your driveway and your long-term maintenance plan.
20. How long does it take for driveway sealer to dry?
    • Drying times vary, but it may take 24 to 48 hours for the sealer to fully cure and dry.
21. How much area does a 5-gallon bucket of concrete sealer cover?
    • Around 500 to 750 square feet for one coat.
22. Should you wet asphalt before sealing?
    • No, it’s generally not necessary to wet asphalt before sealing.
23. Why sealing your driveway is pointless?
    • Sealing can protect your driveway from damage and extend its lifespan. However, it may not be needed on all driveways.
24. How long should you stay off sealed asphalt?
    • It’s best to avoid driving on a freshly sealed driveway for at least 24 to 48 hours.
25. Do you use a roller or squeegee for driveway sealer?
    • Both can be used, but squeegees are often preferred for a smoother finish.
26. How long before it can rain on sealed driveway?
    • Typically, it’s best to wait at least 24 hours after sealing before exposing the driveway to rain.
27. What temperature can you seal a driveway?
    • Between 50°F to 85°F (10°C to 30°C) is usually recommended.
28. Does sealcoating fill cracks?
    • Sealcoating can fill small surface cracks, but it won’t repair larger or structural cracks.
29. What driveway sealer lasts the longest?
    • High-quality sealers with proper application tend to last longer, but there is no one-size-fits-all answer.
30. How many square feet is a 2-car driveway?
    • A standard 2-car driveway is usually around 400 to 600 square feet.
31. How much sand do I add to asphalt sealer?
    • Typically, you can add 2-5 pounds of sand per gallon of sealer to improve traction.
32. How much sand do I put in my driveway sealer?
    • Follow the manufacturer’s recommendations, but it’s commonly 2-5 pounds per gallon.
33. How many inches around is a 55-gallon drum?
    • A standard 55-gallon drum has a circumference of approximately 87 inches.
34. Should I wash my driveway before sealing?
    • Yes, it’s recommended to clean and remove debris from your driveway before sealing.
35. What are the cons of sealing a driveway?
    • Cons can include the cost of materials, the need for periodic resealing, and the risk of improper application.
36. Which is better oil or water-based driveway sealer?
    • Water-based sealers are generally more environmentally friendly, but the choice depends on your specific needs.
37. What is the best time to seal asphalt driveway?
    • Spring or early summer and early fall are often good times when temperatures are suitable.
38. Can you seal coat at night?
    • Sealing during the day when temperatures are optimal is recommended, but you can seal at night if necessary.
39. Does rain affect asphalt sealing?
    • Yes, rain can negatively impact the quality of the sealcoat if it occurs shortly after application.
40. How do you calculate sealing?
    • To calculate how much sealer you need, measure the square footage of the area and divide it by the coverage rate per gallon.
41. How many coats of sealer should I use?
    • Two thin coats are often recommended for better coverage and durability.
42. How much does 17 liters of driveway sealer cover?
    • Approximately 170 to 255 square meters for one coat, depending on the product and application.
43. How do you calculate square yards of asphalt?
    • To convert square feet to square yards, divide the square footage by 9 (since 1 square yard equals 9 square feet).
44. How many square feet will a 1-gallon bucket of paint cover?
    • Around 350 to 400 square feet for one coat.
45. Does a 55-gallon drum hold exactly 55 gallons?
    • A standard 55-gallon drum can hold slightly less than 55 gallons due to variations in manufacturing.
46. How to calculate circumference?
    • The formula for calculating the circumference of a circle is C = πd, where C is the circumference and d is the diameter.
47. What is the height and diameter of a 55-gallon drum?
    • The height of a standard 55-gallon drum is typically about 34.5 inches, and the diameter is around 22.5 inches.
48. How long after power washing can you seal a driveway?
    • Allow the driveway to dry completely after power washing, which may take 24 to 48 hours, before sealing.
49. Is it better to brush or squeegee driveway sealer?
    • Squeegees are often preferred for a smoother finish, but the choice depends on your skill and preference.
50. Can you seal your driveway too often?
    • Yes, frequent sealing can lead to a buildup of sealer, which may not be beneficial. Follow recommended resealing intervals.
51. Is it bad to seal your driveway every year?
    • Sealing annually may not be necessary for most driveways and can lead to excessive buildup. Follow recommended maintenance guidelines.
52. Should I seal my own driveway?
    • If you have the necessary tools and experience, you can seal your own driveway, but professional services are also available.
53. What is the longest-lasting driveway sealer?
    • High-quality sealers applied correctly tend to last longer, but it varies based on factors like climate and traffic.
54. Are there different grades of driveway sealer?
    • Yes, there are various grades and types of driveway sealers, including asphalt emulsion, coal tar, and acrylic-based.
55. Is water-based or acrylic sealer better?
    • The choice between water-based and acrylic sealer depends on your specific needs and preferences.