To calculate drapery stack back, consider the width of the curtain and the available space for stacking when fully drawn open. Typically, the stack back is estimated at around 10% to 20% of the curtain’s total width. For example, if your curtain is 100 inches wide, the stack back would be approximately 10 to 20 inches.
Drapery Stack Back Calculator
Stack Back: inches
| Curtain Width (in inches) | Stack Back Percentage | Stack Back Size (in inches) |
|---|---|---|
| 50 | 10% | 5 |
| 60 | 15% | 9 |
| 72 | 20% | 14.4 |
| 84 | 12% | 10.08 |
| 96 | 18% | 17.28 |
FAQs
How do you calculate drapery return? Drapery return is typically calculated as a fraction of the curtain rod’s diameter. A common estimate is around 10% to 20% of the rod’s diameter. So, if your curtain rod has a diameter of 1 inch, the drapery return would be approximately 0.1 to 0.2 inches.
What is the stackback of curtains? The stackback of curtains refers to the width of the curtain when it is fully open and pushed to one side of the window or opening. It’s the amount of space the curtain occupies when not covering the window.
What is a stack back on a functional drape? A stack back on a functional drape refers to the same concept as mentioned earlier – it’s the width of the curtain when it’s pulled completely to one side and not covering the window or stage.
What is stack back width? Stack back width is the measurement of how much space your curtains will occupy when fully drawn open. It depends on the curtain’s fullness and the width of the window or opening it’s covering.
How do you calculate drapery fullness? Drapery fullness is typically calculated by determining how much extra fabric width you need to achieve the desired fullness. A common fullness factor is 1.5 to 2 times the width of the window or opening. So, if your window is 60 inches wide, you’d need drapery fabric that’s 90 to 120 inches wide for a fullness factor of 1.5 to 2.
How do you calculate pipe and drape? Pipe and drape setups vary depending on the specific design and requirements, but a basic formula involves adding the lengths of horizontal crossbars (pipes) and vertical uprights (pipes) to determine the total length needed. For instance, if you have a 10-foot-wide backdrop and want 1-foot drape on each side, you’d need a 12-foot crossbar and two 10-foot uprights.
How big is curtain stack? The size of the curtain stack depends on the width of the curtain, the fullness factor, and the width of the window or opening. As an estimate, the stack could occupy about 10% to 20% of the curtain’s total width when fully drawn open.
How much overhang should curtains have? The overhang of curtains, also known as the “break” or “puddle,” is a matter of personal preference and style. It can vary from just touching the floor to pooling several inches on the floor. A common recommendation is a 1- to 3-inch puddle, but it can be more or less depending on your taste.
How do you calculate ripple fold drapery? Ripple fold drapery is typically calculated based on the curtain track or rod’s length. You’ll need to determine the desired spacing between the carriers (the devices that hold the fabric) and the total track length. The spacing can vary, but it’s often between 3 and 4 inches.
What is the name of the curtains at the back of the stage? The curtains at the back of the stage are often called “backstage curtains” or “rear stage curtains.”
How wide should stationary drapery panels be? The width of stationary drapery panels can vary widely based on design preferences, but a common rule of thumb is to have each panel be 1.5 to 2 times the width of the window or opening you’re covering.
How do you calculate stack size? The stack size is determined by the width of the curtain, the fullness factor, and any additional space needed for proper stacking when the curtain is drawn open. To calculate it, you’d need to consider these factors.
How is stack size determined? Stack size is determined by the curtain’s width, fullness, and any space needed for stacking when the curtain is open. It’s a variable that depends on your specific curtain and setup.
Does a stack have a size? Yes, a curtain stack has a size, which is the width of the curtain when it is fully drawn open and pushed to one side.
How do you measure for drape size? To measure for drape size, you typically need to measure the width of the window or opening you want to cover and determine the desired fullness factor. Then, calculate the required width of the drapery fabric using the fullness factor.
What is the best fullness for curtains? The best fullness for curtains depends on personal preference and the style you want to achieve. Common fullness factors range from 1.5 to 2 times the width of the window or opening.
How much fabric width is required to create drapery with a fullness of 150%? To achieve a fullness of 150%, you would need drapery fabric that is 1.5 times the width of the window or opening you are covering.
How much fabric do I need for draping? The amount of fabric you need for draping depends on the size of the area you want to drape and the desired style. It’s best to measure the area and consult with a designer or seamstress for precise calculations.
What is the formula for calculation pipe? The formula for calculating the length of pipe needed in a pipe and drape setup is to add the horizontal crossbar length (pipe) to the vertical uprights’ length (pipe).
What is the formula for laying pipes? The formula for laying pipes in a pipe and drape setup is to determine the total length needed by adding the horizontal crossbar lengths (pipes) and vertical upright lengths (pipes).
What length should pooling curtains be? The length of pooling curtains is a matter of personal preference. They can range from just barely touching the floor to pooling several inches or more. A common recommendation is a 1- to 3-inch puddle.
What size curtains do I need for a 240cm window? For a 240cm window, you may want curtains that are 1.5 to 2 times the width of the window for a pleasing fullness. So, you would need curtains that are approximately 360cm to 480cm wide.
How much bigger than the window do curtains need to be? Curtains are often 1.5 to 2 times the width of the window for a fuller look, but the exact size depends on personal preference and style.
How far should a curtain pole extend past the window? A curtain pole should typically extend about 6 to 12 inches (15 to 30 cm) past each side of the window frame to allow enough space for the curtains to fully clear the window when drawn open.
Is it better for curtains to be too long or too short? It’s generally better for curtains to be slightly too long than too short. Longer curtains can be hemmed to the correct length, while curtains that are too short may not fully cover the window.
How far should curtains sit off the floor? Curtains can hang just above the floor or have a slight 1- to 3-inch (2.5 to 7.5 cm) clearance, but the exact height can vary based on personal preference.
What is the difference between ripplefold and S fold? Ripplefold and S fold are different curtain styles. Ripplefold curtains have evenly spaced ripples or waves along the width, giving a clean and uniform appearance. S fold curtains, on the other hand, create a continuous “S” shape when closed, providing an elegant and flowing look.
How to calculate ripple? Calculating the spacing of ripples in ripplefold curtains depends on the track or rod’s length and the desired spacing between the carriers (the devices that hold the fabric). The spacing can vary but is often between 3 and 4 inches.
What is the difference between ripple fold and wave fold? Ripple fold and wave fold curtains both have a flowing appearance, but the key difference is in the shape of the folds. Ripple fold curtains have evenly spaced ripples or waves, while wave fold curtains create larger, more organic-looking waves.
What is the curtain that covers the back and rear of the stage? The curtain that covers the back and rear of the stage is often called the “backstage curtain” or “rear stage curtain.”
Why are curtains red on stage? Red stage curtains are a traditional choice in theater because the color red is associated with drama, excitement, and passion. Red curtains can create a sense of anticipation and draw the audience’s attention to the stage.
What is the area behind the curtains called? The area behind the curtains on a stage is often referred to as the “backstage” area. It’s where performers and crew members prepare and wait before going on stage.
How far apart should pleats be in curtains? The spacing of pleats in curtains can vary depending on the style and fabric, but common pleat spacings are around 4 to 6 inches (10 to 15 cm) apart.
How many pinch pleats per curtain panel? The number of pinch pleats per curtain panel depends on the width of the panel and the desired fullness. Typically, there may be 4 to 6 pinch pleats per panel for a standard-sized window.
How do you calculate drapery panels in yardage? To calculate the yardage needed for drapery panels, measure the width of the window or opening, determine the desired fullness factor, and then multiply by the length of the panel. Divide by 36 to convert inches to yards.
What does the stack size depend on? The stack size of curtains depends on the width of the curtain, the fullness factor, and any additional space needed for proper stacking when the curtain is drawn open.
What is the rule of stack? The rule of stack refers to the concept that when curtains are fully drawn open, they should stack neatly and not obscure too much of the window or opening. The stack size is determined by this rule.
What is the stack capacity method? The stack capacity method is a way of determining the maximum number of items (e.g., goods on a shelf) that can be stacked in a given space without exceeding the capacity or creating instability.
What is stack size and capacity? Stack size refers to the width of a curtain when it is fully drawn open. Stack capacity, in a broader context, typically refers to the maximum load or number of items that can be stacked in a certain space or on a particular support structure.
What is the stack length? Stack length refers to the measurement of the width of the curtain when it is fully drawn open and stacked to one side.
Are stacks fixed size? Stacks can vary in size depending on factors like curtain width, fullness, and the available space for stacking. They are not necessarily fixed in size.
What is the average drape width? The average drape width can vary widely based on the application, style, and personal preference. Common drape widths for residential curtains, for example, may range from 36 inches to 60 inches or more per panel.
How do you measure fabric for drapery? To measure fabric for drapery, you typically measure the width of the window or opening you want to cover and then determine the desired fullness factor. Multiply the window width by the fullness factor to calculate the required fabric width.
What is the length of a drape? The length of a drape depends on the specific application and style. Drapes can range from floor-length to shorter lengths, depending on the desired look and function.
Does it matter if curtains are too wide? Curtains that are slightly too wide can be adjusted or gathered to fit, but excessively wide curtains may not hang properly and may look bulky.
How wide is a curtain stack? The width of a curtain stack depends on factors like the curtain’s width, fullness, and available space for stacking. It can typically occupy around 10% to 20% of the curtain’s total width when fully drawn open.
How much spacing do you need for drapery? The spacing for drapery depends on the style and design, but common spacing includes 3 to 4 inches between carriers (devices that hold the fabric) in ripplefold curtains, and 4 to 6 inches between pleats in pinch pleat curtains.
Do pinch pleat curtains use more fabric? Pinch pleat curtains may use slightly more fabric than other curtain styles due to the pleating, but the amount of extra fabric required is generally not significant. It depends on the specific pleat style and curtain design.
GEG Calculators is a comprehensive online platform that offers a wide range of calculators to cater to various needs. With over 300 calculators covering finance, health, science, mathematics, and more, GEG Calculators provides users with accurate and convenient tools for everyday calculations. The website’s user-friendly interface ensures easy navigation and accessibility, making it suitable for people from all walks of life. Whether it’s financial planning, health assessments, or educational purposes, GEG Calculators has a calculator to suit every requirement. With its reliable and up-to-date calculations, GEG Calculators has become a go-to resource for individuals, professionals, and students seeking quick and precise results for their calculations.