Crushed Stone Calculator in Tons

FAQs

How many tons of crushed stone do I need?

To determine the number of tons of crushed stone you need, you’ll have to know the length, width, and depth of the area you want to cover with crushed stone. Then you can use the following formula:

Tons of Crushed Stone = (Length (feet) × Width (feet) × Depth (feet)) / 27

How much crushed rock is in a ton?

The quantity of crushed rock in a ton can vary depending on the type of rock and its density. Generally, a ton of crushed rock is approximately equal to 1.25 to 1.6 cubic yards of material.

How do I know how much crushed rock I need?

To calculate how much crushed rock you need, follow these steps:

1. Measure the length and width of the area in feet.
2. Determine the desired depth of the crushed rock in inches.
3. Convert the depth to feet by dividing it by 12.
4. Use the formula from the first question: Tons of Crushed Rock = (Length (feet) × Width (feet) × Depth (feet)) / 27

How do you convert yards of crushed stone to tons?

To convert yards of crushed stone to tons, you can use the following conversion factor:

1 yard of crushed stone = approximately 1.3 tons

How much does 1 ton of crush and run cover?

The coverage area of 1 ton of crush and run (also known as crusher run, quarry process, or dense grade aggregate) will depend on the depth and the size of the material. As a general estimation, 1 ton of crush and run can cover approximately 100 square feet at a 2-inch depth.

How many square feet does 1 ton of crushed stone cover?

The coverage area of 1 ton of crushed stone can vary depending on the density of the material and the size of the stone. As a rough estimate, 1 ton of crushed stone can cover around 100 to 120 square feet at a 2-inch depth.

How much does 1 ton of crushed stone weight?

The weight of 1 ton of crushed stone can vary depending on the type of stone and its size. In general, 1 ton of crushed stone can weigh between 2,000 to 2,600 pounds (900 to 1,180 kg).

How much will 20 tons of gravel cover?

The coverage area of 20 tons of gravel will depend on the size and depth of the gravel layer. As a rough estimate, 20 tons of gravel can cover around 2,000 to 2,400 square feet at a 2-inch depth.

How much will 5 tons of rock cover?

The coverage area of 5 tons of rock will depend on the size and depth of the rocks. As an approximation, 5 tons of rock can cover around 500 to 600 square feet at a 2-inch depth.

How deep should crushed stone be?

The depth of crushed stone needed will depend on the purpose and load-bearing requirements. For general landscaping and pathways, a depth of 2 to 3 inches is often sufficient. For driveways or areas with heavier vehicle traffic, a depth of 4 to 6 inches is recommended.

How much crushed stone do I need for 100 square feet?

To calculate the amount of crushed stone needed for 100 square feet, you’ll need to know the desired depth. For example, if you want a 2-inch depth, you can use the formula:

Tons of Crushed Stone = (Length (feet) × Width (feet) × Depth (feet)) / 135

How many yards is 1 ton of crushed rock?

One ton of crushed rock is approximately equal to 1.25 to 1.6 cubic yards of material.

How heavy is 1 yard of crushed gravel?

The weight of 1 cubic yard of crushed gravel can vary depending on the density of the gravel, but it is typically around 2,500 to 3,000 pounds (1,133 to 1,360 kg).

How much does 1 cubic yard crushed stone weigh?

The weight of 1 cubic yard of crushed stone can vary depending on the density of the stone, but it is generally around 2,700 to 3,000 pounds (1,225 to 1,360 kg).

How much gravel is 1 ton?

One ton of gravel is approximately equal to 1.25 to 1.6 cubic yards of material.

How many yards can a 1-ton dump truck hold?

The capacity of a 1-ton dump truck can vary, but it is typically around 2 to 3 cubic yards.

How many tons of crushed stone in a dump truck?

The number of tons of crushed stone a dump truck can carry depends on the capacity of the dump truck. For example, a standard full-size dump truck can carry about 10 to 15 tons of crushed stone.

How do you calculate tons of stone?

To calculate tons of stone needed, use the formula:

Tons of Stone = (Length (feet) × Width (feet) × Depth (feet)) / 27

What area will 1 ton of stone cover?

The coverage area of 1 ton of stone can vary depending on the size and depth of the stones. As a rough estimate, 1 ton of stone can cover around 100 to 120 square feet at a 2-inch depth.

How far will 1 ton of gravel cover?

The distance 1 ton of gravel will cover depends on the size and depth of the gravel layer. As a rough estimate, 1 ton of gravel can cover around 100 to 120 square feet at a 2-inch depth.

How many tons of rock do I need to cover 200 square feet?

To calculate the number of tons of rock needed to cover 200 square feet, you’ll need to know the desired depth. For example, if you want a 2-inch depth, you can use the formula:

Tons of Rock = (Length (feet) × Width (feet) × Depth (feet)) / 135

How much does 3/4 crushed stone weigh per yard?

The weight of 3/4 crushed stone per yard can vary depending on the density of the stone, but it is generally around 2,700 to 3,000 pounds (1,225 to 1,360 kg).

How deep should a crushed stone driveway be?

The depth of a crushed stone driveway will depend on the specific requirements and the load it needs to bear. In general, a depth of 4 to 6 inches is recommended for a stable and durable driveway.

Will a yard of gravel fit in a pickup?

Yes, a yard of gravel can typically fit in a pickup truck bed. However, it’s essential to consider the payload capacity of your truck and ensure it can handle the weight of the gravel.

What’s the best size gravel for a driveway?

The best size of gravel for a driveway is typically 3/4-inch or 1-inch stone. This size provides good drainage, stability, and durability for the driveway surface.