3/4 inch Crushed Stone Calculator

FAQs

How do you calculate how much crushed rock I need?

To calculate how much crushed rock you need, follow these steps:

1. Measure the length, width, and depth of the area in feet.
2. Convert the depth to feet by dividing it by 12.
3. Use the formula: Volume = Length (feet) × Width (feet) × Depth (feet).
4. Convert the volume to cubic yards (1 cubic yard = 27 cubic feet) to get the amount of crushed rock needed.

How much area will a ton of 3/4 gravel cover?

The area covered by a ton of 3/4 inch gravel depends on the depth of the gravel layer. As a rough estimate, 1 ton of 3/4 inch gravel can cover around 100 to 120 square feet at a 2-inch depth.

How much does a yard of 3/4 inch crushed stone weigh?

The weight of a yard of 3/4 inch crushed stone can vary depending on the density of the stone, but it is generally around 2,700 to 3,000 pounds (1,225 to 1,360 kg).

How much crushed stone do I need for 100 square feet?

To calculate the amount of crushed stone needed for 100 square feet, you’ll need to know the desired depth. For example, if you want a 2-inch depth, you can use the formula:

Tons of Crushed Stone = (Length (feet) × Width (feet) × Depth (feet)) / 135

How much does 1 ton of crush and run cover?

The coverage area of 1 ton of crush and run (also known as crusher run, quarry process, or dense grade aggregate) will depend on the depth and the size of the material. As a general estimation, 1 ton of crush and run can cover approximately 100 square feet at a 2-inch depth.

How many square feet does 1 ton crushed rock cover?

The coverage area of 1 ton of crushed rock can vary depending on the density of the material and the size of the rocks. As a rough estimate, 1 ton of crushed rock can cover around 100 to 120 square feet at a 2-inch depth.

How many square feet will 1 ton of 3/4 rock cover?

The coverage area of 1 ton of 3/4 inch rock can vary depending on the density and size of the rocks. As an approximation, 1 ton of 3/4 inch rock can cover around 80 to 100 square feet at a 2-inch depth.

How do I calculate how much gravel I need?

To calculate how much gravel you need, follow these steps:

1. Measure the length, width, and depth of the area in feet.
2. Convert the depth to feet by dividing it by 12.
3. Use the formula: Volume = Length (feet) × Width (feet) × Depth (feet).
4. Convert the volume to cubic yards (1 cubic yard = 27 cubic feet) to get the amount of gravel needed.

What area does 1 ton of gravel cover?

The area covered by 1 ton of gravel can vary depending on the density and size of the gravel. As a rough estimate, 1 ton of gravel can cover around 100 to 120 square feet at a 2-inch depth.

How many pounds is 1 yard of crushed gravel?

The weight of 1 yard of crushed gravel can vary depending on the density of the gravel, but it is typically around 2,500 to 3,000 pounds (1,133 to 1,360 kg).

Will a yard of gravel fit in a pickup?

Yes, a yard of gravel can typically fit in a pickup truck bed. However, it’s essential to consider the payload capacity of your truck and ensure it can handle the weight of the gravel.

What is 1 yard of gravel?

One yard of gravel is equal to 27 cubic feet of material.

How deep should crushed stone be?

The depth of crushed stone needed will depend on the purpose and load-bearing requirements. For general landscaping and pathways, a depth of 2 to 3 inches is often sufficient. For driveways or areas with heavier vehicle traffic, a depth of 4 to 6 inches is recommended.

How much does 1 cubic yard of crushed stone cover?

The coverage area of 1 cubic yard of crushed stone can vary depending on the density of the stone and the size of the rocks. As a rough estimate, 1 cubic yard of crushed stone can cover around 100 to 120 square feet at a 2-inch depth.

What is the difference between crushed stone and gravel?

Crushed stone and gravel are both popular materials used for landscaping and construction purposes, but they have some differences. Crushed stone is made from larger rocks that are crushed into various sizes, while gravel is a more general term for small stones or pebbles. Gravel may also include rounded river stones.

How thick should crush and run driveway be?

For a crush and run driveway, a depth of 4 to 6 inches is generally recommended to ensure stability and durability.

How far does crush and run spread?

The spread of crush and run will depend on the depth of the material and the size of the area being covered. As a rough estimate, crush and run can cover approximately 100 square feet per ton at a 2-inch depth.

How many yards is a dump truck?

The number of yards a dump truck can carry varies depending on its size and configuration. Please refer to the previous answer for more details on dump truck sizes and capacities.

How many tons of crushed stone do I need?

To calculate how many tons of crushed stone you need, follow the steps mentioned earlier in the response regarding calculating crushed rock needed.

How much rock do I need to cover 150 square feet?

To calculate the amount of rock needed to cover 150 square feet, you’ll need to know the desired depth. For example, if you want a 2-inch depth, you can use the formula:

Tons of Rock = (Length (feet) × Width (feet) × Depth (feet)) / 135

How much does 1 ton of crushed rock weigh?

The weight of 1 ton of crushed rock can vary depending on the type of rock and its density. In general, 1 ton of crushed rock can weigh between 2,000 to 2,600 pounds (900 to 1,180 kg).

How many tons of rock do I need to cover 200 square feet?

To calculate the amount of rock needed to cover 200 square feet, you’ll need to know the desired depth. For example, if you want a 2-inch depth, you can use the formula:

Tons of Rock = (Length (feet) × Width (feet) × Depth (feet)) / 135

How many square feet does a pallet of rock cover?

The area covered by a pallet of rock will depend on the size, density, and thickness of the rocks on the pallet.